Search: dielectric grease   >  

Hello Gary. It looks like the Curt Class 3 Hitch #C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Mike; based on what you have said I agree that the right side running light wire is likely the problem and should be replaced. We don't carry Shorelandr parts and I don't know what your current setup is like so I don't know…

It sounds like you did your research here. The Draw-Tite Max-Frame Trailer Hitch Receiver #76227 would be a great choice for your 2016 Subaru Outback. From there you are correct, you will need to install a 4-way wiring harness before you can add the…

Hey Dale, while we don't have the linch pins that come with the part #BX88219 we do have the part #3371303033 that is a pair of 1/4 inch diameter pins.

Hey Tom, I checked with Tekonsha and it does look like the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK57VR does work with a 2024 Grand Highlander. For a brake controller I'd actually suggest going with one of…

Hi Mike; yes, a Curt ball mount like the #C45056 can be flipped over. This is considered the rise position and will not impact the capacity in any way. I attached a picture below which shows the ball mount in both orientations, both are acceptable.…

There's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have: Draw-Tite part #118712 fits the Limited, Touring L, and Touring L Plus models. Draw-Tite part…

Yes, the Curt Trailer Hitch Receiver #C29UR is a confirmed fit for your 2018 Chrysler Pacifica Hybrid. We actually have an installation video of this hitch on a 2020 Hybrid model that I'm linking to this page for you to check out. If you let me…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…