Does Rear View Safety Windshield Mounting Arm # RVS-619UM Fit 1999 Ford F-250

Question

Question:

I am interested in this rear view mirror bracket for mounting the RVS backup monitor. Will it fit on a 1999 Ford F250 super duty mirror mount? Thanks

asked by: Paul

0

Expert Reply:

Yes, I checked out the replacement OEM mirrors for your 1999 Ford F-250 and they use the same mount that the Rear View Safety Windshield Mounting Arm # RVS-619UM has on it. This is not too surprising as most vehicles use this style of mirror mount.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 11

Hello Len, I am sorry, but the Brake Buddy Second Vehicle Kit BB59SR has been discontinued and is no longer available. Brake Buddy was manufactured by Hopkins, and Hopkins had closed, I have heard word that they will be back in production because…

view full answer...

Answer 12

While we haven't had the opportunity to install the Curt #C15809, Curt #C15704, and Draw-Tite #DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper…

view full answer...

Does Rear View Safety Windshield Mounting Arm # RVS-619UM Fit 1999 Ford F-250

Product Page this Question was Asked From

Continue Researching