To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into existing tow connector on your truck - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located above the muffler on the driver's side. You will need to lower the muffler to access the wiring harness. After plugging in the connector, route the 7-way end of the harness along the inside of your bumper toward the center of your vehicle.
Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole connector itself - to help prevent corrosion.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Does what it is supposed to do. Working great
Quality products and great instructions.
Very helpful emails and instructions
zip ties too short
Awesome product from an awesome company
It looks great. Item is what I ordered. Shipping was very good.
After a botched delivery the customer service team stepped up and got things back on track. I am appreciative of the fine response and excellent service.
Excellent product, plug and play, easy peasy. Zip ties are WAY too short. Got into my own Zip tie stash!
The electrical adapter was easy, the bracket holes did not match the7-way adapter. The description of the bracket said”7-way, not even close.
Good customer service but should not be charged separately for the plug ins when you bought the hitch you need both to pull a trailer down the road
Exactly the right cable length to go from the factory plug to the hitch area. Smoothly and firmly connected into the factory plug.
This was easy to install, plug and play. It's still working great and would buy from etrailer again. The website is easy to use and received my product quickly.
Everything arrived as described and installation went smoothly after watching the videos. The installation videos were very helpful.
unless zip ties were too short to around hitch otherwise great wire harness
Perfect fit works great as expected.
I purchased to 7 point rather than the 4 point just for the occasion tha I my need it. The cost differences were so low it was worth it
Overall the purchase experience was good online, however the package was poor at best. The hitch was placed in a box with nothing protecting the mounting brackets of the hitch so they pierced out of the box and caused damage to the hitch. Packaging should have been better.
Fit to existing wiring. Had to modify mounting bracket to fit my car.
Super easier to install and a great installation video to follow! Nice job!
Love that it just plugs in and ready to go. It's been working great with no issues! Great product.
Plug and play, easy to mount and looks factory, will need to install mount plate reversed to have enough clearance for plastic hitch cover to latch. Very happy
Great product and easy to install. Plugged it right into my the wiring in the car and attached it to the hitch receiver I purchased with it. No issues with the connectivity and all my trailer lights work as they should. Thank you!
To whom it may concern
I have been very displeased with your customer service on several occasions. I’ve tried to order the right parts for my GM truck in regards to the proper fit up for the year and the model.
I have access parts that I’ve purchased from your company sitting in a box on a shelf. That’s no good to me.
I truly wish you would send me the right parts at some point
It’s a 2018 GM 2500 Van I need the complete wiring harness to create a seven pin connector
The vehicle does not have any factory harness wiring for a
I’ve had I have had several conversations with the technicians on the phone and they keep sending me the wrong stuff
So if you’d like to help me out, give me a call and call me don’t email me call me
It was literally Plug and Play couldn't get easier
The videos you have online were great help and really helped in my decision to install the hitch on my 2021 Buick Enclave. The only real problem I had was deciding how to attach the power connection. I purchased the no drill kit and it would have worked fine if I didn't want to use the cover plate when we are not pulling anything. I installed the 7-way connector adapter using one of the mounting brackets. Unfortunately, the holes in the mounting bracket did not line up with the actual plug so I had to drill so extra holes in the bracket to make it work correctly. I am not sure if I just purchased the wrong bracket or what. But, it would be nice if the bracket was included with the wiring harness and what the best mounting position would be. The only other major problem I had was even after adjusting and mounting the bracket on the bottom of the hitch, the Buick hitch cover did not actually fit perfect because the hitch itself was just slightly too big. I did get the cover on but had to really play with it to get it in place.
Overall, I am happy with how the product looks and hopefully in 2 weeks when I pull the boat up to the lake everything will go well!!
Does the job, though the cord was too short to mount this in the dedicated spot on my 2022 Traverse (which is about a foot to the right of the hitch receiver)
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.






















Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.