Product Experts Available Now!
Call 1-800-940-8924
Rear View Safety Windshield Mounting Arm for Mirror Monitors
(81 reviews)
Price: $26.85
Rear View Safety
Rear View Safety Windshield Mounting Arm for Mirror Monitors
Part Number: RVS-619UM
$26.85
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (81)
- Q & A (0)
- Videos (1)
- Photos
Rear View Safety Accessories and Parts - RVS-619UM
- Backup Camera
- Monitor Mount
- Rear View Safety
- Rear View Safety windshield mounting arm for mirror monitors
- Designed to replace rear view mirror in vehicle
- Slides onto mounting button attached to the windshield
- Works for any self-standing monitor
- 1-Year warranty
RVS-619UM Rear View Safety Windshield Mounting Arm for Mirror Monitors
Video of Rear View Safety Windshield Mounting Arm for Mirror Monitors
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for An In-Depth Look at the Rear View Safety Windshield Mounting Arm for Mirror Monitors
Hi there., I'm Michael with etrailer.com. Today we're gonna take a quick look at this rear view safety windshield mounting arm. Now, this is going to allow you to mount your monitor in place of your vehicle's rear view mirror. And this is going to allow you to tick the monitor up off the dash or console where can oftentimes be in your way, potentially obstruct your view. And it's going to put it right there in your windshield where you are used to looking up to see what's behind you. So very easy to get this installed.
It's gonna slide right onto the mounting button that attaches to your windshield. You gotta screw there to tighten it down in place. Our hexagonal connection here is going to work with any self standing monitor. You can tighten it down by threading in that backing plate there until it's nice and snug for you. This does have a nice, feels very sturdy and you can adjust the angle here, but those are very tight.
So you're not gonna have to worry about it falling on you or dropping as you're hitting bumps in the road and that sort of thing it's gonna hold up really well. It feels very sturdy to me. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
Ratings & Reviews
4.9
81 reviews
by:
Zack
08/21/2023
Our camera camera system screen mount came with a suction cup and double-sided tape, neither of which gave a solid mounting option (screen would bounce every time hit a bump) and we could not fit our sunshade around the bulky mounts. Since the rearview mirror is practically useless, I decided to use this adapter with the existing windshield mount and it is now solid and doesn't bounce at all. It also allows you to adjust the angle of the screen, whereas the suction cup and tape did not. I am very happy with the performance of this mounting arm!
by:
Patrick Payne
12/30/2018
Ordered this mounting arm to attach a recently purchased 7" back up camera monitor so that i would not have to use the adhesive or screw mounting options that came with the monitor. I installed it in a 2012 Nissan NV 3500 high roof cargo van that has no rear windows, but had the rear view mirror mounting button already attached to the windshield. Since the van had no rear view mirror installed, I simply had to slip the mounting arm onto the mounting button and screw it down to tighten it in place. Worked like a charm!!! Simple solution for anyone who wants to mount a back up camera monitor for a cargo van that does not have a need for a rear view mirror. Highly recommended!
Patrick P.
12/31/2019
Still working great! No issues whatsoever!
by:
Mavin
05/15/2026
I installed this on my 2017 Thor 28a class-C motorhome (E450 Chassis0, and it works well. Holds the monitor securely and it puts the monitor within easy reach of the driver. Sturdy and well made.
by:
Edward
05/31/2026
Was not delivered as expected, payed the extra shipping option to get sooner.
by:
Alonso
09/30/2026
Prompt service for a quality product.
by:
Keith
02/17/2026
Lookin for ‘this” for a while. Put my monitor in place of my (useless) rearview mirror. Great and unique product.
by:
Frederick
11/19/2025
This allows me to mount my 7 inch backup camera monitor where a rear view mirror would be located. And it is permanent. Much better location and permanent mount than the suction cup mount that I got with the monitor and it would would fall off often.
by:
Mike T
09/29/2022
This is the perfect mount for my 4 channel backup camera monitor in my 3/4 ton truck! It does not shake or lose adjustment even in such a rough riding vehicle.
by:
Gerhard
01/26/2023
We purchased this bracket to hold our backup monitor in our motor home and works great
by:
Bruce
03/29/2026
Exactly what I needed to keep it in place
by:
Randy
08/21/2025
Its great for box truck with rear cameras fits forms and function .
by:
Laylow
09/28/2021
Perfect! That's what I was looking for to set up with my rear view camera to mount on the front windshield of my 2002 Ford F150. It's sturdy and is built with strong material. It mounts perfect where my rear view mirror use to be at,I searched everywhere and etrailer had what I needed.
Laylow
9/30/2022
So far working great!
by:
Juan
08/11/2025
Thank you etrailer! You are the best!
by:
Rich S
11/17/2020
I didn't need a rearview mirror in my motorhome but I did need a stable place to mount my dash cam. The existing mount wouldn't work in the cam slot, but this worked perfectly for that purpose.
Rich S.
11/18/2021
Still very happy with item and I highly recommend this item!
by:
Donna
09/22/2019
we purchased a backup camera for being able to see behind our travel trailer. With the mounting arm, we are able to take off our review mirror, use the mounting to mount the camera display. Works perfect. Thanks solved a problem for us.
by:
Daniel
04/01/2023
Though this mounting arm is designed for a RVS monitor, I adapted it to mount an Auto Vox Solar 4 monitor by replacing the bolt on the monitor end with a M7 x 30 to provide longer length. I connected this mount to a custom fixture that was 3D printed per a file done by The Fit RV by enlarging the hole diameter to fit the M7 bolt. The windshield attachment D ring fitted a special adapter purchased from AutoZone for MB Sprinter vans (Brandmotion SPRTAB rearview mirror bracket 5000), however, this adapter did not fit with my 2016 Sprinter. Thus, I replaced the bolt on the D ring with a M5 x 25 bolt and two nuts to secure the anchor ring that I took off of the OEM mirror mount. Since I am waiting on a replacement for the new Auto Vox monitor, I haven't had a chance to verify that my modifications will work, but am hopeful. Now I know why RV manufactures leave the useless rear view mirrors on the MB chassis.
by:
John
09/07/2022
The ball joints are extremely stiff, the one next to the monitor mount needed to be mechanically held and the rest of the unit very firmly moved around it. I would have sent back but I needed it to finish up the project and it took so long to get it. Definitely would not mount up the monitor and then use it to move the ball joint to position the monitor. Got the unit adjusted so monitor is in good position but will consider the adjustment permanent.
by:
Tony B
11/28/2018
This mirror mount works perfectly. I replace my rear view mirror on my truck with this mount for my backup camera monitor, when I'm pulling my 5th wheel trailer. When I'm not pulling a trailer, I put the mirror back on..
by:
Dave
04/03/2023
We have around 100 trucks with aftermarket rear view backup cameras that were mounted to the windshield with a 2 sided tape bracket. Needless to say with the temperature fluctuations they were constantly falling off. This mounts on the rear view mirror button. I have installed a couple of these so far and none have fallen off. I will be ordering more of these because I believe this bracket is the solution.
Dave
4/4/2024
I am replacing the tape mounted brackets with the rear view mirror mounting brackets as needed and have not had any issues with them after a year of use. I believe this is the solution and will continue to install them.
by:
Ben
08/02/2021
Got this to mount a cheap [resell] reverse camera monitor in my Ford motorhome. The mounting end for the monitor is not exactly correct, but this wasn't exactly meant for it either. Fit the Ford mirror tab perfectly. Still, it works a treat!
by:
Jan
09/06/2021
Arm was used to mount a Haloview rear view monitor in a class C RV to the windshield rear view mirror mount. Works terrific eliminating suction cup monitor mount.
by:
Randy
08/06/2025
Fit and function . was just what customer needed
by:
Peter
04/07/2025
Very good customer service and on time delivery.
by:
James
01/18/2020
The work well to hold light item
Cockroach I.
1/20/2021
I found the bracket to work well, and hold my gps system
25
81
true
Show More Reviews
See what our Experts say about this Rear View Safety Accessories and Parts
- Will The Rear View Safety Windshield Mounting Arm RVS-619UM Work With Haloview Monitor?Hello Jim, thanks for reaching out. The Rear View Safety Windshield Mounting Arm # RVS-619UM will work with a Haloview BT-M7 monitor. According to RVS, their mount will work with any monitor, so compatibility should not be an issue. The button that attaches to the glass is part # RVS34FR.
view full answer... - Replacement Mount For A 7" Furrion RV Camera System Monitor No, the only compatible mount for the 7" Furrion monitor # FR47FR is the # FR79SR, which will suction cup to your windshield.
view full answer... - Installing the Monitor on the Rear View Safety Windshield Monitor Mounting ArmThe Rear View Safety Windshield Mounting Arm for Mirror Monitors # RVS-619UM will use the metal on the windshield and then will connect to the monitor by sliding the monitor over the metal from the bottom and then turning the dial to secure the monitor position by tightening the dial to the back of the monitor.
view full answer... - Can The Big Adjustment Screw Be Removed From The Rear View Safety Windshield Mount Arm?I went out to the warehouse and attempted to unscrew the screw on the: -Rear View Safety Windshield Mounting Arm for Mirror Monitors # RVS-619UM, and was unable to unscrew it from mount as it appears that, that part is permanently positioned in the mount.
view full answer... - Weight Capacity Of The Rear View Safety Winshield Monitor Mounting ArmThe Rear View Safety Windshield Mounting Arm # RVS-619UM is capable of supporting a monitor that is up to 3lbs and can mount with the windshield style mirror mounting bracket. It was designed for use with their Rear View Safety Universal Mirror Monitor # RVS-619N The Fookoo 1080P Wireless Monitor system, part DW9T4 does not use a mirror style mounting bracket and instead has a dash style bracket. If you are able to find or create a mount to allow for it to connect this way and the entire...
view full answer... - Will Rear View Safety Windshield Mount RVS-619UM Fit 2023 Mercedes Benz Sprinter 3500?Yes the Rear View Safety # RVS-619UM will fit the mounting button on your 2021 Mercedes Benz Sprinter 3500 XD Chassis. This will allow you to attach a 7" RVS Branded monitor. If you have a different brand then this arm won't kit, as it's only designed for RVS brand monitors.
view full answer... - What is Overall Length of Rear View Safety Windshield Mounting Arm # RVS-619UMHey Rex, sorry for the long delay in getting back to you but we finally got the length of the Rear View Safety Windshield Mounting Arm # RVS-619UM and it is 4-3/8 inches.
view full answer... - Will the Rear View Safety Windshield Mounting Arm Fit on a 2009 Ford E-Series The RearView Safety Windshield Mounting Arm for Mirror Monitors # RVS-619UM is designed to fit on the standard windshield mounting buttons found on almost every vehicle. As long as your 2009 Ford E Series has the standard mounting button holding your rear view mirror on, this mount will work on your vehicle. This is intended to be a universal fit item.
view full answer... - Will the Rear View Safety Windshield Mounting Arm part # RVS-619UM Fit my 2000 Chevrolet SilveradoThe Rear View Safety Windshield Mounting Arm for Mirror Monitors part # RVS-619UM will fit your 2000 Chevrolet Silverado. You will of course need to remove the factory mirror to install the new arm. To do this there is a Torx bit screw in the bottom holding it in. I was unable to confirm the sixe but it looked to be in the T-15 to T-20 range. Once that is removed you will then lift on the factory mirror to remove it revealing the industry standard windshield tab. If equipped unplug the...
view full answer... - Will The RVS Mounting Arm Work For A Haloview M7108 Monitor In A 2004 Class C RV?Yes, according to Rear View Safety the: - Rear View Safety Windshield Mounting Arm for Mirror Monitors # RVS-619UM will work with any mirror to mount any monitor, and will work for any RV self standing mirror.
view full answer... - Will The Rear View Safety Windshield Mounting Arm Fit A 2017 Nissan Titan Pro-4xYes, the Rear View Safety Windshield Mounting Arm # RVS-619UM that you referenced does fit your 2017 Nissan Titan Pro-4x as this is designed to fit the standard windshield mounting buttons found on most vehicles. The Rear View Safety Windshield Mounting Arm will use the metal on the windshield and then will connect to the monitor by sliding the monitor over the metal from the bottom and then turning the dial to secure the monitor position by tightening the dial to the back of the monitor.
view full answer... - Will Rear View Safety Windshield Mounting Arm # RVS-619UM Fit 2019 Ford Transit 250Yes, the Rear View Safety Windshield Mounting Arm # RVS-619UM that you referenced does fit your 2019 Ford Transit 250 Van as this is designed to fit the standard windshield mounting buttons found on vehicles.
view full answer... - Does Rear View Safety Windshield Mounting Arm # RVS-619UM Fit 1999 Ford F-250Yes, I checked out the replacement OEM mirrors for your 1999 Ford F-250 and they use the same mount that the Rear View Safety Windshield Mounting Arm # RVS-619UM has on it. This is not too surprising as most vehicles use this style of mirror mount.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Daron K
Installed by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Zack
8/22/2024
One year later and still functions as well as it did on day one. I would recommend this mount to anyone wanting to install a camera system on their rv or trailer.