Determining Towing Capacity of 1989 Chevy C3500 Dually

Question

Question:

The vehicle in question is a two door, extended cab 4x4. I am looking at buying a car trailer and I can’t find any info on tow capacity of my vehicle. Data tag typically located on door jam has been removed.

asked by: Guy T

0

Expert Reply:

Best option would then be to try contacting a Chevy dealer to see if they could possibly look it up online. Due to the age of the vehicle there isn't any info I can find for it. If the truck has a 454 cubic inch engine it looks like it may have a capacity of around 8,000 lbs, but that's the best info I was able to find.

The Curt hitch part # C15325 that you referenced does fit your truck though.

expert reply by: Jameson C

0

Answer 1

The B and W Hitch part #BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you…

view full answer...

Answer 2

Hey Brian! For 7-way wiring to go with your Curt #C15325 the best option is the #20023. This is only a 7-way so you can either use an adapter like #PK12716 or swap out the connector for one that fits a USCAR connection like the Curt Dual Connection…

view full answer...

Answer 3

While we do not have a receiver that is specifically designed to work with your 1996 Chevrolet C2500 having the Tommy liftgate, I do have some measurements that may help you determine if one will fit your truck. You will need to measure the height…

view full answer...

Answer 4

If your 1989 Chevy truck is a cab and chassis model (these are the ones that come without beds that are then turned into service vehicles, flat beds, and that sort of thing) then hitch #41947 will fit for sure. But apparently, for 1989, Chevy trucks…

view full answer...

Answer 5

Part #C15325 has a maximum gross trailer weight capacity of 16,000 lbs and 17,000 when using weight distribution. The tongue weight capacity is 2,400 lbs and 2,400 lbs when used with weight distribution. This hitch is designed to be used on trucks…

view full answer...

Answer 6

For your 1994 GMC 3500 with a roll pan bumper we have the Curt hitch part #13942 as a confirmed fit. This fits without drilling as well.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Determining Towing Capacity of 1989 Chevy C3500 Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching