Setting up the B and W Heavy-Duty Trailer Hitch Receiver on your 1986 Chevrolet C/K Series Pickup Video

David, all of the hitches for your truck are going to have around the same amount of exposure. So with that said, I'd recommend going with the Curt Trailer Hitch Receiver #C14082. This is a class IV hitch, with a max weight capacity of 10,000…

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket…

For the weight capacity and ease of installation, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class V #41947. This hitch is a confirmed fit for your vehicle. For your wiring harness, I recommend the 4-Pole Hardwire Kit with Circuit…

We don't have any hitches that are confirmed to fit on the CUCV M1008 military truck, but from what I was able to find out is that it's a version of the Chevy C/K series trucks that were manufactured for civilian use. You may be able to use…

The Curt #13028 is designed to fit the 1981 - 1987 Chevrolet C/K Series Pickup 6 Foot Bed with Standard or Step Bumper. Assuming everything with the frame is the same as it was from the factory this hitch will line up and fit your 1986 Chevy. It…

I had our warehouse measure each of the front mount trailer hitch receivers you mentioned, and the dimensions are as follows. The Curt #31408 measures 32-3/4" long x 8-3/4" wide, the Draw-Tite #65080 measures 36-3/4" long x…

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

Whether the Ford E-450 van chassis is a 2002, 2003, or 2004 (or anything in the 200 to 2007 model year range) it will take front mount receiver #65001. So no worries, we got you covered! The Curt hitch, #33055, is indicated as a fit for the E-350 but…

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

No, there are not. The aftermarket hitches, like the etrailer item #e55KR, all mount below the original location of the factory hitch on your 2005 Ford Explorer XLT. I have attached a picture below to show you what it will look like once installed. I…

For your 1995 Chevy C3500, I recommend your start with the Tekonsha Prodigy P3 brake controller #90195. This proportional controller will apply your trailer brakes at the same time and with the same intensity as you hit the brake pedal in your truck.…

The Curt #33055 you mentioned isn't a fit for the 1991 F-250, it's a fit for the E-Series Vans, which Curt confirms. Unfortunately, they don't offer a front mounted hitch for your truck. The bolt hole spacing I was able to obtain is as…