Recommended Suspension Support for 2018 Mercedes-Benz Sprinter 3500 Motorhome

Question

Question:

I am wanting suspension enhancement for my 2018 Mercedes Sprinter 3500 motorhome pleeeeeeease make a recommendation. Thank you!

asked by: Gregory

0

Expert Reply:

For the rear suspension on your Mercedes-Benz Sprinter 3500 motorhome the Timbren Suspension Enhancement System # TMBRSP35A will work perfectly. These jounce-style springs are designed specifically for a motorhome application and their 7,000 pound capacity will provide you with great support for a comfortable and level ride.

If you also want to add some front suspension support I recommend the Timbren # TMBFSP35. This will add to the rear support to create a much more stable ride in your motorhome so your rides to and from are just as pleasant as the destinations.

I have attached a short video demonstration and the written installation instructions for these kits that you can check out as well.

expert reply by: Chris R

0

Answer 1

Correct, the SumoSprings Solo Custom Helper Springs part #SSR-338-47 will have a softer ride than the SumoSprings Solo Custom Helper Springs part #SSR-338-54 as it's made of a softer spring. That said, the latter will also provide more support.…

view full answer...

Answer 2

If you don't presently tow, you can use the Timbren Rear Suspension Enhancement System #TMBRSP35A on your 2016 MB Sprinter 3500 but they may be a little stiff. They will reduce body roll, but they make the ride a little stiff for most people when…

view full answer...

Answer 3

For your motorhome built on a 2018 Mercedes-Benz Sprinter 3500 we have great suspension enhancement kits available but none that use air bags. Instead the kit I would recommend is the SumoSprings kit part #SSF-106-47 which is similar to the Timbren…

view full answer...

Answer 4

Thanks so much for reaching out to us. Do you have a 2-wheel drive model? also, do you have dual rear wheels?

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Answer 9

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Recommended Suspension Support for 2018 Mercedes-Benz Sprinter 3500 Motorhome

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching