Question:
I have a 2017 Jeep Wrangler with a SmittyBilt XRC bumper, is there an adapter to allow me to flat tow it?
asked by: mike
Expert Reply:
For your 2017 Jeep Wrangler with a Smittybuilt XRC bumper we have the Blue Ox adapter part # BX88357 which will allow to connect the vehicle to a Blue Ox tow bar like part # BX7380.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BRK2016, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Blue Ox Patriot II Radio Frequency, Portable Braking System - Proportional
Blue Ox Alpha 2 Tow Bar - Motorhome Mount - 6,500 lbs
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin
Follow up Questions