Front Hitch Recommendation for 2018 Ford F-250

Question

Question:

What front hitch should I get for my 2018 Ford F-250?

asked by: Kenneth

0

Expert Reply:

For your 2018 Ford F-250 the front hitch I recommend is the Curt # C31078 because it's made in the USA and because it mounts high enough that it won't reduce ground clearance.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Yakima StageTwo Bike Rack #Y47VR won't secure properly to the adapter you're talking about. It's a great rack and I love the anti-rattle system, but the anti-rattle is built to essentially brace itself inside the receiver and then…

view full answer...

Answer 2

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 3

Hello Robert, Great question, we have reached out to Brophy in the past about this exact issue. They recommend using the #HSSF for aluminum beds like yours, just as long as there is two inches of clearance under the lip of the bedside (please refer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Peter! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is what you need. This is designed to fit Coleman-Mach Series 45000, 47000, and 48000 AC units. The 48204-669 you have falls under the 48000 so they are compatible. Where are…

view full answer...

Answer 9

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Answer 10

Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness #C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will…

view full answer...

Answer 11

Kelly you're spot on, thanks for reaching out! Since you mentioned you have “the bar that the Falcon 2 hooks to” that tells me your current setup on the Geo Metro is using a Roadmaster crossbar-style base plate. I checked fitment for both…

view full answer...

Answer 12

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Front Hitch Recommendation for 2018 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching