Curt Front Mount Hitch Recommendation for 2014 Ram 2500

Question

Question:

Do you sell an equivalent unit which would fit a 2014 RAM 2500?

asked by: Robert C

1

Helpful Expert Reply:

We do have a Curt front hitch available for your 2014 Ram 2500. For that we have the Curt part # C31015 which would fit and work well. I attached an install picture and video for this hitch for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Hey Chris congrats on the new truck! I did some research and the HappiJac Camper Tie-Downs item #LC236326-205221 is exactly what you need for your 2026 Ram 2500. I'm working on getting our website updated as we speak. This kit includes both front…

view full answer...

Answer 2

Hi Rick, I’m really glad you sent the photos over because that was the right move before ordering. I can see why you were concerned about clearance with that cooler sitting up front. After looking into it more closely, the EcoHitch part #306-X7900 is…

view full answer...

Answer 3

As long as the motorcycle and carrier do not exceed the vertical load rating of the Curt Front Mount Trailer Hitch Receiver part #C31015 which is 500 lbs then you will be able use this hitch. Please keep in mind that you will also want to check in…

view full answer...

Answer 4

I reached out to my contact at Curt regarding the issues you're having installing the Front Mount Hitch #C31015 on your 2014 Ram 2500 Diesel. He said they have not heard of this particular problem before. In fact when they did the test fit for…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Curt Front Mount Hitch Recommendation for 2014 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching