Recommended Storage Cover for Palomino Real lite HS 1806 Truck Camper

Question

Question:

I live in Bozeman MT where winters can alternate between very cold and sunny to severe winter weather with tons of snow and horrid east winds. I have the camper stored out in the field on the west side of our house and lilac bushes - so somewhat protected from the wind, but not the sun. The overall length is around 17.5 ft. and has a queen size bed. It fits on my F250 truck with 68inch bed with tailgate down. What do you recommend for a cover, and would you also suggest some extra strapping to secure it? Thanks

asked by: David R

0

Expert Reply:

For your 17.5 foot Palomino Real lite HS 1806 truck camper, I recommend the Camco UltraGuard Slide-In Camper Cover - 18' Long # CAM45770. This cover is a three layer top panel to repel water and snow while allowing moisture to escape. It has heavy-duty polypropylene fabric on the sides. This cover is engineered with vent flaps to reduce wind lofting so no additional strapping is required to secure the cover.

expert reply by: Jason S

0

Answer 1

Yes, it will. The 7-Way Vehicle Power Adapter for Furrion RV Observation Camera item #FR87PR provides a steady flow of power to your Furrion system. The electronics in the newer trucks like your 2022 Ram 1500 send a pulse signal that isn't…

view full answer...

Answer 2

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Recommended Storage Cover for Palomino Real lite HS 1806 Truck Camper

Product Page this Question was Asked From

Continue Researching