Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Protect your slide-in camper during storage with this heavy-duty cover. UV-resistant, water-resistant cover is made of polypropylene. A unique triple layer top panel provides maximum resistance to rain and snow. For campers 18' long.
Features:
Specs:
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Product is perfect for my Arctic Fox 990
Good quality and fittment is nice, should protect my investment for years to come!
Fast Shipping and great fit on my Lance 855S
It came in 3days and it is now installed on the camper and looks just fine. It is a bit short on the sides but that is not a problem. It is the exposure to the elements that will be kept out on the essentials of the camper. Thanks for the help and heads up for the product. You were very helpful and supportive in my inquiries.
Fits perfectly, easy to install with good directions included, tie down straps work as they should. Very happy
Cover was very easy to install even with solar panels etc on top-thank you!!
Received a size small; ordered 18 feet long. Wrong size and need to return and get refund. Not happy, camper is in the rain and will shop locally.
Didn't last 3 months. Made out of to light of material.
Fits a little snug at the gutters on a 2015 Arctic Fox 990. Feels like a heavier cover than others we have used in the past. Time will tell how long it lasts.
There are a few small tears at the corners, but holding up well.
This cover is everything that is advertised. I had it on for 1 winter so far and it did the job. I was able to fold it and even put it back in the carry bag. I would give this 6 stars just for the quality. Ha 7 stars for fitting in the carry bag. Great product
So far so good. I’m in Northern Washington state and this cover sees a lot of rain and leaves during the winter. When we’re not using the camper for winter camping.
Covers a 2019 Arctic Fox 990
Just one small tear on the side from something other wise fits and looks good.
We ordered the camper cover for our (2024) Arctic Cat 865. Although it was listed for the 2022 model it had the same dimensions as our 2024 model. The cover was delivered quickly and we installed it without any issues. The cover comes with a patch kit and storage case which is really nice when we use the camper. The cover has all the needed straps attached and an access area on the back with a zipper. The cover is stitched well and made of a soft but sturdy material, although time will tell in the harsh sun. I’m happy with the purchase and believe it will help protect my plastic vent covers and solar panels.
Nice fit, fast delivery.
This cover is well made, and fits very nicely. Vents for air circulation prevent mold growth. Keeps dust, tree sap, leaves and twigs off, preventing stains and sun damage. Plenty of straps for tying down. Heavy duty Zipper allows easy access to door and inside of camper without removing cover. Only problem I have is the red squirrels crawl under the cover and chew holes in it. Of course this is not the fault of Camco or etrailer.
Looking good
The cover I bought does not fit like the picture shown above. Not even close. I'm hoping it will protect my camper. It fits very loosely and I'm concerned about the wind when it comes about because it doesn't fit tightly. I'm sure it will be protected from the snow and sun. I just put it on this past week end cuz I had work done on my camper. I had to add a lot of straps to tighten it down and still concerned about the wind.

Heather A.
11/21/2018
Since these covers do fit various size campers there will be slack in the material on smaller campers. If you would like a smaller size cover, I recommend this camco camper cover in 16 1/2 ft long part # CAM45771. This cover is designed to fit 14-16 feet campers.
Helpful Links
I did everything wrong, didn't read guidelines, put it on the camper at the back, just me and the wind was blowing. After I read the instructions and got the cover going in the right direction it unfollowed easy. There were several spots were there was a chance to tare the cover so I warped and tape them. It's the first time covering the camper so it took a little time but the cover fits and looks good.i'm very happy with how it goes on. The material might seam a little thin but it went on with no damage. For the price if it makes a few years I'll be happy to buy a nouther one.

Jerry S.
11/11/2019
Did everything right, went on easy,no tears so far.
Good fit, access to the rear door of the camper
Cover fit my Arctic Fox perfectly. Would have given it 5 stars but it did not come with gutter guards.
This is our third season with extreme winds. Had to get a new one. Works well.
Of course I must start by saying that etrailer's customer support is second to none. It is always a pleasant experience to order from etrailer.com.
I am very pleased with the design and quality of this Camco camper cover. The material seems to be of very good quality. The air vents at the top are a smart design feature which allows air to escape from the cover when the wind blows. The top portion is designed with some overhang that acts as a drip edge which sheds water away from the sides. Very good design! The fasteners seem to be of good quality and there are velcro ties for each of the 4 jacks that support the truck camper. It fits pretty well on the my Lance 915, although I was having a little trouble keeping the front portion on the cab-over from coming off. I ended up adding a couple straps from the front fastener to the 2 front jacks to help keep it in place. As with any cover, the main enemy is wind. It can tear apart a cover under the right circumstances. The trick is to keep it tight enough that it's not flapping in the wind but not too tight such that it puts stress on the friction points. I do wish there were more tie down points at the bottom and under the cab-over. I"m thinking of getting a kit that cuts eyelets and add some more points for tie downs at the bottom edges. The zippers for the door are of good quality. I might consider adding a dowel or something to the bottom of the zippered door opening to make it easier to roll up the door opening. Kind of difficult to get it to roll up reasonably well by yourself. With 2 people, it would roll up nicely. Overall, I don't think I could find a cover that would fit any better without getting a custom made cover, which would cost 2 or 3 times as much. This cover is a very good investment and I would definitely recommend it.
First of all your 'product image' photo does NOT match what you are selling.
I made my own gutter covers from 3.5" pieces of pool noodles. I'm not certain why directions tell you to turn it inside out...when I got it on the roof, I had to struggle to turn it right side out. We have a solar panel and AC unit that put some strain on the way it fits. There is no velcro around the camper jacks as one reviewer stated. We live on a lake where the winds howl 25-30 mph at times. I'll post photos in the spring. Hopefully it will hold up as it seems to be reinforced and quality material.

Richard
10/12/2024
Product was VERY satisfactory. Made it through the winter without an issue...its ready to go on again. Good quality all the way around.
This fit great on my 2027 10-2 northern lite truck camper.
Fits well on our Palomino HS8801. It appears to be well made. I will know more in the spring.
The cover was sewn incorrectly. The all four side are skewed with the roof about 12" counterclockwise making the fit very poorly.
Do you have a question about this RV Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Barbara
7/28/2019
It is history. It ripped and tore up as the year progressed. Completely tore off the camper. I was shocked. I had to order a new cover in April to replace it.