Hardwiring Tekonsha Prodigy P3 Brake Controller in 2011 Chevy Traverse and 2015 Chevy Colorado  

Question:

Helpful Expert Reply:

For your Prodigy P3 # 90195 on your 2011 Chevy Traverse, if you have the factory 7-way then you just need wiring harness # 3026-P. If you don't have that then we recommend using the # ETBC7 kit that will have you hardwire from the battery using a circuit breaker. The circuit breaker used for the brake controller power is a 20 amp like # PK54520.

I've attached a video of the 12V power wire connection, but it does not include the brake controller power connection that will be nearly identical. I've attached an article to assist with the entire diagram of the kit.

expert reply by: Jason S

1

Divan

3/4/2019

Hi Jason. I need the wiring harness from Tekonsha P3 to 2015 Chevrolet Colorado please.

Jason S.

3/4/2019

In a 2015 Chevy Colorado, there is no plug present under the dash, but the wires are already run. If you need the pigtail adapter, you can use # 7894 or # 20127 to install your Prodigy P3 Brake Controller # 90195. If this is a second vehicle application that you will use the same controller between, then you may be interested in the Replacement Mounting Bracket Kit for Tekonsha Prodigy P3 Trailer Brake Controller # TK5906.