bing tracking image
Q & A Icon

Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans  

Updated 06/29/2018 | Published 06/28/2018

Question:

I also need the switch's. One is a single switch with on in out setting with center being off and the other is round turn switch with 3 settings and it has a double coil on the back side of it. Or if you have the square plate that the fan hooks to with a hole for the vent handle on one corner and the 2 switches in the other two corners please let me know. Thank you so much sir for you time and your kind attention into this mater.

0

Expert Reply:

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 is the replacement for your Blade Assembly and Bow-Style Bracket with 14-3/8" blade diameter.

expert reply by:
0
Timothy G
Ken profile picture

Ken

6/28/2018

I also need the switch's. One is a single switch with on in out setting with center being off and the other is round turn switch with 3 settings and it has a double coil on the back side of it. Or if you have the square plate that the fan hooks to with a hole for the vent handle on one corner and the 2 switches in the other two corners please let me know. Thank you so much sir for you time and your kind attention into this mater.

Timothy G. profile picture

Timothy G.

6/29/2018

The Fan-Tastic Vent 3350 Series Upgrade Kit # FV803358 are the switches you need for the Fan-Tastic Vent Roof Vent Fans. This kit allows you to upgrade your Fan-Tastic Vent 3350 Series roof vent to include automatic lift with 3-Speeds, reverse directions, a thermostat, and a rain sensor. The Replacement 3-Speed Switch for Fan-Tastic Vent Roof Vent # FVK1031-05 Replaces the 3-speed switch in your Fan-Tastic Vent 12-volt roof vent.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>