How to Find Correct Replacement Hubs for Shorelandr Boat Trailer

Question

Question:

Im looking for trailer hubs for my Shorelandr trailer. Do you sell replacement parts for this type of trailer. Please, any help would be great Thank you,

asked by: Bill

0

Expert Reply:

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.

Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it. Finally, you also need to know the weight rating of your axle to determine the correct hub.

For example, idler hub assembly # AKIHUB-545-35-G-K is for a 3,500 lb axle and has bearings # L68149 and # L44649 with grease seal # 58846.

If you let me know what your bearing numbers, wheel bolt pattern and axle rating are I would be able to find a compatible hub for you.

expert reply by: Kyle S

0

click to enlarge

Karen H.

5/21/2020

I have a 70's vintage shore lander boat trailer. I need dust caps for the hubs they appear to have a narrow inside rim. Any caps I have found do not fit flush into the hub. the original dust caps are squat in appearance. I would appreciate hearing from anyone who knows anything about these caps. Thanks

Chris R.

5/25/2020

We might have the right replacement caps for you, but in order to verify the correct size, I will need the existing cap's dimension. You can either measure the cap itself or the hub bore (where the cap fits) diameter using a digital caliper. If you can tell me this dimension I will be happy to make a recommendation.

Jim

7/23/2020

LM67048 bearing on shore lander. Will this tell me what axel I need?

Chris R.

7/28/2020

That's definitely something you need to know but you'll also want to determine the other bearing number as well. There will be both an inner and outer bearing on the spindle - check the numbers stamped onto the inside of both and that should be enough to verify a compatible replacement hub.

Lee

7/23/2020

Hi, I am looking for a galvanized 5 spoke/punchouts, 5 lug spare tire and wheel rim assembly (Shorelandr part number 4300313) that matches the other tires on my aluminum Shorelandr boat trailer. The tire is a Carlisle Sport Trail LH ST215/75D14 LRC and my wheel rim specs match the specs for Carlisle part number 1421137400B except I have 5 punchouts and the 1421137400B has 8 punchouts. Do you sell this tire and wheel rim assembly for my boat trailer, and if so, how can I order it from you?

Chris R.

7/28/2020

I'm not sure we have that exact style wheel available. Just in case there's something else that might work as a replacement though, I've linked our entire 14" wheel selection below that you can look through.

Helpful Links

dept-pg-trailer_tires_and_wheels-sf-wheel_only-sz-5_on_4~1%7c2_inch-pc-14_inch.aspx

Answer 1

Hi Marc! That particulr ShoreLand'r trailer typically has 3,500 lb axles. However, you will need to confirm this information. I recommend taking a look at your axle tags, it is typically listed on the tag. Assuming that is correct, you can use…

view full answer...

Answer 2

You will have to go out and measure the rollers you have on your trailer if you are looking for an exact replacement to use. You will want to measure the overall diameter of them plus the diameter of the hole that runs down the middle of them. For…

view full answer...

Answer 3

Jeff, the closest match we have to the specifications you listed is the Channel Tongue Trailer Coupler part #CT-3001-Z. It fits a 2 inch trailer ball, mounts to a 2 inch wide channel tongue, and is rated for 3,500 lbs gross trailer weight. The…

view full answer...

Answer 4

Hey Kirk, We sure do have a pre-greased direct replacement hub for your DICO 45263! You'll need the #AKIHUB-545-2-EZ-2K which is an exact replacement for your hub, and comes pre-greased as requested. It sounds like you're needing a pair of…

view full answer...

Answer 5

Hey Blake! Are those disc brakes or drum brakes? The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you were looking at is designed for disc brakes, fits a 3" x 5" tongue, and has a 2" coupler so it will fit a 2"…

view full answer...

Answer 6

Hi Dan; did you just figure this out? I see you ordered the #CE13515 which fits a standard 3,500 lb axle with a #84 spindle. The only way I have to identify replacement hubs without you removing everything is with the axle tag on your trailer.

view full answer...

Answer 7

Hi Don; I wasn't able to find anything with the model number and even if I could, I would only be guessing at the axle size for a replacement hub. You will need to identify your axle to find the right hub. You can either look for an axle tag or…

view full answer...

Answer 8

Hey Jim, welcome back! You are on the right track with the #APT5 kit. As long as the hanger height, shackle and equalizer length are the same, you can be sure it will work. The equalizer in the kit is 7-3/4" long center hole to center hole. The…

view full answer...

Answer 9

The easiest way to find the correct replacement hubs for a trailer is to crawl under it and look at the axle tag on the center of the beam so you can find the capacity. Then, you'll look at the existing hubs to see what bolt pattern they have.…

view full answer...

Answer 10

When bleeding the brakes on a surge actuator, such as the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR, you want to start by making sure there is fresh fluid in the reservoir then press a screw driver against the rod in the access…

view full answer...

Answer 11

The Dexter Hub part #8-258-5UC1-EZ is an exact match for the hubs you have on your trailer currently and would be a great choice. Bearing Buddies can be pretty convenient but the problem with them is that they make it too easy to over fill the hub…

view full answer...

Answer 12

The grease seal that comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindles #BK2-100 will definitely work for your application. You want grease seals to be as close to matching specs as possible, but a…

view full answer...

How to Find Correct Replacement Hubs for Shorelandr Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching