Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence and tracks straight on long hauls. Durable powder-coated wheel resists rust, and the low-profile tire design helps boost fuel efficiency.
This combo comes pre-mounted and aired up, so it's ready to install right out of the box. Whether you're replacing a worn-out setup or prepping a new trailer, you'll save time and skip the hassle of separate mounting and inflation.
With a Load Range C rating, this tire offers strong hauling capacity for gear, tools, or recreational equipment. A great choice for steady performance without upsizing your setup.
This popular bolt pattern works with many common utility, cargo, and boat trailers. It's a reliable match for most small to mid-size trailers, so you can tow with confidence knowing it fits right.
The KR53 tread is engineered to help channel water away from the contact patch, improving grip and stability on wet pavement. Whether you're towing through rain or shine, it keeps your trailer tracking with confidence.
Radial construction helps reduce heat buildup and extend tread life. The 13" x 4-1/2" steel wheel uses a 2-step finishing process with an e-coat primer and gray powder coat that resists rust and road wear.
If the tire fails under normal use in the first year, it gets replaced - simple as that. It's just one more way Kenda's helping you tow with confidence, mile after mile.
If the tire fails under normal use in the first year, Kenda will replace it. That's confidence you can count on, whether you're heading to the jobsite or the campsite.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look at this Kenda Karrier KR53 ST175/80R13 Load Range C radial trailer tire mounted on this 13-inch Nardo gray mod steel wheel. Now this is the complete trailer-ready tire and wheel package. So the tire is already mounted on this steel wheel and it's gonna be ready to install right when you get it. And our tire here, as we have stamped here on the tire itself, this is an ST175/80R13, as I mentioned at the beginning of our time together.
This is a radial trailer tire, and this tire is designed for trailer use only, not for other vehicles. And it is mounted, indeed, on this 13-inch Nardo gray modular steel wheel. So this is gonna be a great replacement or upgrade for a mini utility, boat, cargo and camper trailers. Our tire is a Load Range C tire, and that means this has a six-ply rating and it's rated to carry up to 1,360 pounds at 50 PSI. So that's going to give it the strength needed for dependable hauling, while still maintaining a comfortable ride.
Now one of the biggest advantages is the radial construction of this tire compared to bias ply tires. Radial tires run cooler on the highway. It's gonna help reduce heat buildup, and tend to wear more evenly over time, helping to extend the life of this tire. And this does use Kenda Karrier 53 tread design, which includes channels that help move water away from the tire. That's gonna help improve traction and stability in those wet conditions, giving you more confidence during rain or on those damp roads.
Now our wheel measuring bead seat to bead seat, the diameter, as I mentioned, is 13 inches. The width of our wheel is 4 1/2 inches. And this features a very common 5 on 4 1/2 inch bolt pattern. So it's going to fit a wide variety of trailer hubs. By the way, if you do not know how to measure your bolt pattern on your trailer, on this product page, if you scroll a little bit lower down on the page, we walk you through step-by-step on how to measure your bolt pattern to make sure that this assembly is going to work for you.
This does use 1/2 inch by 20 wheel bolts. This does not include a center cap, but if you decide to pick one up, you just wanna make sure that it fits a pilot diameter of 3.19 inches. The wheel itself is rated for 1,725 pounds. That exceeds the tire's load capacity, but you are limited by the lowest rated component, so you wanna make sure that you're not exceeding the tire's load rating. Durability is another strong point. As I mentioned, this is a steel wheel. It's finished with a two-step corrosion-resistant process, starting with an e-coat primer, and then this really great Nardo gray powder coat finish. And if you notice, we have two black pinstripes going around the inside perimeter of this wheel. So I really like the color. It's a unique type of gray in my opinion, so I think it's gonna look great on your trailer. So that powder coat finish is gonna do a great job of protecting the wheel against rust, road salt, moisture, and everyday wear, making this a great choice for trailers that really does see a lot of outdoor use. Now, if you think you might need help with getting this installed, on this product page a little bit lower underneath the photo section, typically we have a link that will take you to our installer locator. Click that link and answer the questions that it has for you. And that locator will find an installer in your area that etrailer has partnered with to install this for you. Well, again, my name's Andy. Thank you for joining me.
Ratings & Reviews
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
8/31/2026
Glad we had the right match Jerry, and we appreciate you being a loyal etrailer neighbor =) Do you transport different vehicles, or is it mainly just one?