Availability Of Replacement Hub For Dico 45263
Updated 04/18/2023 | Published 04/17/2023
Products Featured in This Question
Question:
I have a 1995 Shorelandr boat trailer, model OMCB147F-OMCB167F, and want to replace the wheel bearings. The hubs that are currently on it are DICO 45263, 5 lugs on a Ø4.5inch circle. I am not able to remove the races from the hubs because there is not enough of the race exposed on the inside for a punch to catch on it. If I want to order new hub assemblies, which hub asm do I order? The spindles are straight Ø1-1/16inch with a Ø1-1/4inch seat for the grease seal. The pictures are of the grease seal, the bearing, and the hub.
asked by: Chuck B
Helpful Expert Reply:
Thanks for the picture!
If you can't get your races out, you'll just need the entire new hub assembly # AKIHUB-545-2-EZ-2K which comes with brand new races already installed, new bearings, and new grease seals but you'll need to use # 34823 which needs to be purchased separately to match the 1-1/4" grease seal surface you measured.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: trailer hubs and drums
- Search Results: 45263 trailer hub
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: wheel studs
- Search Results: winch strap
- Search Results: bearing buddy seal
- Shop: Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1
- Q&A: Recommended Replacement For A DICO 45263 Idler Hub
- Q&A: Recommended Pre-Greased Hub To Replace DICO 45623 Hub On Shoreland'r Boat Trailer
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Dico 45263 Hub Replacement Bearings and Seal
- Q&A: Replacement Marine Grade Hub for a Dico 45263
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: bearing buddy caps
- Search Results: l44649 kit
- Q&A: Replacement Hubs with L44649 Bearings on Snowmobile Trailer
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Ultimate Overview of the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Q&A: Replacement Hubs, Wheels, and Tires for a Boat Trailer That Uses Dico 45263 Hubs
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Review of the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Measuring To Choose The Right Trailer Axle
- Video: A Closer Look at the Trailer Axle with Idler Hubs
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Video: DIY Installation for the etrailer Galvanized Trailer Idler Hub Assembly for 2,000-lb Axles