Replacement Bearing Kit for 3,500 lb Axle on Shorelander Trailer
Updated 05/10/2023 | Published 05/08/2023 >
Question:
I need grease seals for my shorelander trailer with a 3500# tapered axle. Kit BK2-100 has the correct bearings but the grease seal might not be right. The problem that I see is that Shorelander uses a spindle sleeve that has an OD of 1.749. The grease seal that Shorelander specifies is 1.741 x 2.561 The grease seal included in the Bk2-100 kit measures 1.719 x 2.565 Will the grease seal included in your kit work with the Shorelander spindle sleeve or will it be too tight?
asked by: Jim
Helpful Expert Reply:
The grease seal that comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindles # BK2-100 will definitely work for your application.
You want grease seals to be as close to matching specs as possible, but a difference of 0.008" won't be an issue - it's actually better that it is slightly smaller than it would be for it to be slightly bigger.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: 4410130
- Search Results: brake pads
- Search Results: shorelander
- Search Results: trailer brakes
- Search Results: 480~12 trailer tires and wheels
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Q&A: Replacement Actuator for UFP A-60 34044
- Q&A: Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
- Shop: Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator with Fill Cap - Drum - 2" Ball - Primed - 7.5K
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 25 1/4 leaf spring
- Search Results: 25 1 4 leaf spring
- Q&A: Spare Hub for 2024 ShoreLand'r BLACKSHORE ARM'R 2 Boat Trailer
- Q&A: Highest Speed Rating for a 4.80 x 12 Trailer Tire
- Q&A: Is There Typical Way to Remove Hub That is Stuck
- Q&A: Upgrading 4.80-12 Trailer Tires On a Haulmaster Trailer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: Installation of the etrailer Trailer Axle 4-Leaf Double-Eye Spring on a Boat Trailer
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Video: Review of Tie Down Spare Tire Mount - Frame Mount - TD78FR
- Video: Complete Breakdown of the Extra Offset Trailer Spare Tire Mount by Dutton-Lainson
- Video: Installing the Double Lip Grease Seal for 3,500-lb Axles
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Article: Most Popular Wheel Bearings


