Recommended Replacement for the Bulldog A-Frame Trailer Jack Part 1551060301

Updated 06/08/2018 | Published 06/07/2018

Products Featured in This Question

Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs

(516)

$67.53

Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall

(312)

$20.74

Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs

(516)

$59.97

Replacement 6" Caster Wheel for Bulldog Trailer Jack with 2" Tube Diameter - Qty 1

(80)

$36.50

Question:

I have a Bulldog part number 1551060301 Jack on a trailer i need to replace. What product number is that of your and if possible could i get a size heavier?

asked by: Toby

Expert Reply:

I called Bulldog about the Bulldog A-Frame Jack part 1551060301 that you are wanting to replace and they were able to give me all of the information I need to offer you a solution. The best option we have is the Bulldog Round A-Frame Jack part # BD155033. This jack has the same 2,000 lb capacity, topwind handle, and 15" travel as the one you have now and will work as an exact replacement.

If you are wanting to upgrade to a higher capacity then I recommend the Bulldog Round A-Frame Jack part # BD155032 which has a 5,000 lb capacity, topwind handle, and 15" travel. However, the outer tube of the jack extends below the mounting plate by 9" which more than the one you have now so you will need to make sure you have clearance in order for it to work.

For a footplate on either jack you can use part # BD018564. There is also a wheel available with part # BD500245 but this will decrease the capacity of the jack to 1,200 lbs. Review videos on both jacks have been attached for you.

expert reply by: Conner L