Trailer Hitch Recommendation for 2002 Pontiac Firebird

Question

Question:

Do you have trailer hitch for 2002 Pontiac Firebird.

asked by: JCAM

0

Expert Reply:

Yes, the Curt hitch part # C11117 is a confirmed fit for your 2002 Pontiac Firebird and would work well for you. For trailer wiring you'd want the universal style kit part # 119178KIT which has been confirmed as a fit as well.

expert reply by: Jameson C

0

Craig

8/18/2024

Is drilling required to fit this hitch on a 1999 Firebird Formula?

Jameson C.

8/19/2024

@Craig Yes there is some drilling required to install the Curt hitch on your 99 Firebird.

Craig

8/19/2024

Can you give me detail? Where, bit size required and such?

Jameson C.

8/19/2024

@Craig 9/16 inch drill bit. I attached install instruction link.

Helpful Links

instructions.aspx?pn=c11117

Answer 1

I do have an option for you to use a hitch mounted cargo carrier on your 1995 Chevrolet Camaro but they do not offer a 2" trailer hitch for this vehicle so you will be limited to cargo carriers with a 1-1/4" shank. The largest ones we have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Trailer Hitch Recommendation for 2002 Pontiac Firebird

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching