Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Converting Older Flat Bar Hitch to Traditional 2 Inch Receiver on 1996 Pontiac Firebird
  There are no available adapters that would convert your flat bar receiver to a 2 inch receiver, nor is there a 2 inch receiver available for the 1996 Firebird. The Class I receiver you mentioned, part # C11117 is compatible with your vehicle, but the hitch will not fit models with dual exhaust or single exhaust models that have the bumper with two cutouts for the exhaust. You can see the install details for the hitch by clicking on the provided link.
  view full answer...
• Is Drilling Required to Install Curt Class I Hitch C11117 on 2001 Chevy Camaro Convertible
  To install the Curt light-duty Class I hitch # C11117 on your 2001 Chevy Camaro (so long as it is NOT the dual exhaust or dual-exhaust-cutout versions) some drilling will be required. The linked instructions detail the process and also list the tools you'll need. All required hardware is included with the hitch. A helpful article on hitch installation is linked for you too. This hitch fits your Camaro convertible so long as it is NOT have the ground effects package. I confirmed with my...
  view full answer...
• Will Curt Trailer Hitch Receiver Fit 1987 Chevrolet Camaro With Crossflow Muffler
  The Curt # C11117 will fit your 1987 Chevrolet Camaro with cross-flow muffler with dual exhaust outlets. I double checked with Curt and when they test fit the hitch on this Camaro generation it actually had a cross-flow muffler with dual exhaust tips so you won't have any issues.
  view full answer...
• Curt Hitch Recommendation for a 2001 Chevy Camaro
  The Curt Trailer Hitch # 11117 that you referenced should work well on your 2001 Chevy Camaro. Having dual exhaust will not cause a problem is this hitch is confirmed to fit other F-bodies like yours that come standard with dual exhaust. You will need to be sure you do not exceed the towing capacities of your vehicle and this hitch with your trailer. Your owners manual will have the towing capacities listed for your vehicle. When determining the overall towing capacity of a setup you...
  view full answer...
• Hitch Recommendation for 1997 Camaro RS with Ground Effects Removed
  I wish we had a fit for the RS 1997 Camaro but the lower ground effects of the RS model means it won't fit. We don't have any options that will either.
  view full answer...
• Is Drilling Required to Install Trailer Hitch on 1991 Chevy Camaro
  The Curt Trailer Hitch # C11117 will require drilling to install on a 1991 Chevy Camaro. There are two holes that need to be drilled with a 9/16" drill bit in order to secure the hitch. Please keep in mind that this hitch does NOT fit models with twin tailpipes or single exhaust models that have the bumper with two cutouts for the exhaust. I have added a link to the installation instructions for you to check out as well.
  view full answer...
  
• How To Use a Cargo Carrier On a 1995 Chevrolet Camaro
  I do have an option for you to use a hitch mounted cargo carrier on your 1995 Chevrolet Camaro but they do not offer a 2" trailer hitch for this vehicle so you will be limited to cargo carriers with a 1-1/4" shank. The largest ones we have that fits this criteria are the 19x47 Curt Cargo Carrier part # C18110 and the 20x47 Reese railed Cargo Carrier part # 63155. For a trailer hitch, the only option for this vehicle is the Curt Trailer Hitch Receiver part # C11117. Please pay attention...
  view full answer...
• Trailer Hitch Receiver Fit for 1989 Pontiac Firebird
  The trailer hitch receiver that fits your 1989 Pontiac Firebird is the Curt Trailer Hitch Receiver # C11117. I have added a link to the installation instructions for you to check out as well.
  view full answer...
• Will Curt Trailer Hitch Work On 1989 Chevrolet Camaro With Aftermarket Dual Exhaust
  The Curt Trailer Hitch, part # C11117 is designed to fit the frame of your 1989 Chevrolet Camaro, but the manufacturer states it will not work with dual exhaust. I have attached the installation instructions you can check out. Since you said the exhaust is an aftermarket system, I cannot tell you that the installation would be successful on your Camaro. You can take a look at the instructions and also the frame on your Camaro to determine if the exhaust would interfere with the hitch.
  view full answer...
• Will the Curt Trailer Hitch Part # C11117 fit a 1984 Pontiac Firebird with Dual Exhaust
  I spoke to my contact at Curt Manufacturing and they stated that as long as the dual exhaust you have on your 1984 Pontiac Firebird was installed from the factory, then yes the Curt Trailer Hitch Receiver part # C11117 will work for you. However, if it is an aftermarket exhaust I would not be able to confirm fitment as Curt trailer hitches are only designed to be used with factory exhaust. If you have an aftermarket exhaust you will want to reference the attached photo which will give...
  view full answer...
  
• Trailer Hitch Recommendation for 2002 Pontiac Firebird
  Yes, the Curt hitch part # C11117 is a confirmed fit for your 2002 Pontiac Firebird and would work well for you. For trailer wiring you'd want the universal style kit part # 119178KIT which has been confirmed as a fit as well.
  view full answer...
• Availability of Trailer Hitch that Fits 1995 Chevy Camaro Z28
  Does your Camaro have two exhaust pipes or a single exhaust pipe? We only have one hitch that fits your vehicle with the Curt # C11117 but this cannot fit versions of your 1995 Chevy Camaro that have dual exhaust. This hitch would work great to carry a bike rack like the Hollywood Racks # HR200Z.
  view full answer...
• Fit of Curt C11117 Class I Hitch on 1995 Camaro Z28
  The Curt # C11117 Class I hitch fits 1995 single exhaust Chevy Camaro models. It won't fit models with twin tailpipes next to each other or models with two cutouts in the bumper for the exhaust to pass through.
  view full answer...
• Trailer Hitch Fit for 1995 Pontiac Trans Am
  The Trans Am was simply a specialty package for the Pontiac Firebird and there is a trailer hitch that fits your 1995 Pontiac Firebird Trans Am, the Curt Trailer Hitch # C11117 which is a Class I hitch with a 1-1/4 inch receiver. I have added a link to the installation instructions for you to take a look at as well.
  view full answer...
• Fit of Curt Class I C11117 Trailer Hitch on 2001 Pontiac Trans Am
  According to Curt Manufacturing, the # C11117 is a fit for all models of the 2001 Pontiac Firebird, including the T/A. For trailer wiring, you'll want to use # 119178KIT. Curt recommends the # C45520 ball mount along with the # PC2 hitch pin and # A-80 for a 1-7/8 inch or # A-82 for a 2 inch hitch ball. I'll link you to our return policy.
  view full answer...
• Curt Trailer Hitch Recommendation for a 1997 Chevy Camaro
  Yes, the Curt Trailer Hitch Receiver with Drawbar # 11117 should work well on your 1997 Chevy Camaro with factory dual exhaust. The only model Camaros it will not fit are the RS models. I attached the installation instructions for this hitch for you to check out also. If you plan on using the hitch for a bike rack or a cargo carrier Curt recommends you get a Curt Trailer Hitch Support Strap # 18050 to help provide extra support for the hitch. To complete your towing setup you may be...
  view full answer...
• Trailer Hitch Fit for 1998 Pontiac Trans Am
  The Curt Class I Trailer Hitch Receiver # C11117 that you referenced is confirmed to fit both the 1998 Pontiac Firebird and Trans Am. I confirmed the fit of the hitch on a 1998 Trans Am with Curt. This hitch features a Class I rating, 1-1/4 inch hitch receiver, and a 2,000 pound towing capacity with 200 pound tongue weight capacity. To comply with Curt's warranty for the hitch, you will want to use a support strap # 18050 with all non-trailer loads, such as bike racks and cargo carriers....
  view full answer...

Do you have a question about this Trailer Hitch?