Replacement Trailer Hitch Hardware Including Carriage Bolt Blocks and Fish Wire

Question

Question:

Bought a 2015 Subaru Outback and traded in my 2014 Outback with the class 3 Curt Hitch 13206. Dealer removed the hitch so I could install on my 2015. Can I get 4 of the Square Hole Spacers CM-SP6 and 2 of the 1/2inch Fishwires? The bolts and nuts I can get locally unless you can get the complete installation kit from Curt. Thanks

asked by: Allen S

1

Helpful Expert Reply:

To put your Curt Trailer Hitch Receiver # C13206 on your 2015 Subaru Outback, I recommend using the hardware kit # RHK which will get you all the parts that originally came with your trailer hitch so you can safely install it on your new vehicle.

On this product page you will select the manufacturer and enter the part number of the hitch and then you will get the correct hardware sent to you.

expert reply by: Jason S

1

Answer 1

Hi Ian, Yep, you can get replacement hardware for the Draw-Tite Hitch #36644 on your Subaru Crosstrek. To do that what you will need is the following: - Replacement Hardware Kit for Trailer Hitches #RHK All you need to do is click #RHK, enter…

view full answer...

Answer 2

From the looks of your recent searches, you are looking for a 1-bike wheel-mount hitch bike rack for your electric fat bike with 4.8 inch tires. For a great rack that fits your needs, I recommend the Saris MHS Modular Bike Rack for 1 Bike -…

view full answer...

Answer 3

Hey Carrie. To add a hitch to your 2023 Toyota Prius LE, you'll want the Curt item #C67RJ. This class I hitch with a 1-1/4" receiver has a 200 lbs tongue weight capacity. This is the highest rated hitch for you Prius. For a bike rack that…

view full answer...

Answer 4

Yes, the carriage bolt blocks (they do look like spacers) and all install hardware are included with the Curt hitch part #13424. I attached a picture that shows all of the hardware that comes with the hitch. CM-SP6 is called out in the instructions…

view full answer...

Answer 5

The Draw-Tite Hitch #75270 that you are installing on your 2008 Honda Odyssey uses M12 X 1.25 X 35mm bolts and 1/4“ X 1-1/2“ X 2” spacer blocks and you can get replacement hardware for this at part #RHK. We do not have these parts available…

view full answer...

Answer 6

Replacement spacer block #RP3022 is the exact block used in many different trailer hitch installations. Its grade isn't ever specified but hitch hardware is always at least grade 5 and in some cases there is a grade 8 used. It is not stainless…

view full answer...

Answer 7

We do have all of the replacement bolts you will need for the Curt item #C13382 hitch. You will want the Replacement Hardware Kit item #RHK. This kit will provide the four nuts and bolts you need, all of the required spacers, and the fishwire tools…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Trailer Hitch Hardware Including Carriage Bolt Blocks and Fish Wire

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching