Trailer Hub and Drum Recommendation for Replacing Hub with Bearings 25580, LM67048
Updated 03/20/2018 | Published 03/17/2018
Products Featured in This Question
Question:
Wanting to put a standard hub with electric brakes on axle, these are old trailer house axles. Would like to use a 5 on 4.5 bolt pattern. Info I have is the inner bearing #25580, outer bearing LM62048 or LM67048, the second number is wore off a bit. The inner measurement on the seal is 2 1/4, cannot find a number on this. The break mount on the axle is a 4 bolt pattern not 5. Is this possible? Thank you
asked by: Craig
Expert Reply:
Actually the bearing info you listed indicates you have a very standard number 42 spindle which we have plenty of fits for. Only issue is that you'd need to go with a 6 on 5-1/2 bolt pattern. So for that you'd want the part # 8-201-5 with the bearing kit # BK3-300 and grease cap # RG04-060.
Then for brake assemblies part # AKEBRK-7-SA which is a kit for both sides of the axle.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Brake Actuating Arm - Left Hand
- Shop: Trailer Brake Actuating Arm - Right Hand
- Shop: Grease Seal
- Video: Comprehensive Review: Trailer Brake Actuating Arm
- Video: Grease Seal Review
- Video: Ultimate Overview of the Trailer Brake Actuating Arm
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Bearing Kit for Trailer Brakes with 8" Hub/Rotor - E-Z Lube - 2,000 lbs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer brakes
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: trailer hubs and drums
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: DeeMaxx Disc Brakes | Expert Insights from the Manufacturer
- Shop: Suspension Enhancement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Search Results: trailer wiring
on Trailer Hubs and Drums
