Distance from Bolt Hole Center to Center Left to Right on Curt Front Hitch # 31198

Question

Question:

What is the bolt-to-bolt width on each pair of bolts and between the 2 pairs of bolts on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2 Item # 31198? Thanks!

asked by: Nick R

0

Expert Reply:

The measurements of the Curt hitch # 31198 are 38-7/8 inches from side to side, 2 inches from front to back 1-7/8 inches from the mounting flange to the cross tube.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have two front mount hitches that are confirmed to fit your 2008 Toyota Tundra. The Curt 31198 and the Draw-Tite #65080. They do have identical specs since they both have a 9,000 pound line pull and 500 pound vertical load. Both have a 2 inch…

view full answer...

Answer 2

The Curt Front Mount Hitch #31198 and the Draw-Tite #65080 for your 2018 Toyota Tundra are indeed just about identical in terms of their capacities and where they will mount on the truck. One thing that does differentiate the two models, and the…

view full answer...

Answer 3

The Dexstar Steel Mini Mod Trailer Wheel #AM20315 does appear to be the wheel I see based on images I could find for a 2021 Forest River Grey Wolf Cherokee 26DBH. We do have the Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod…

view full answer...

Answer 4

There is a way to find where the end of the hitch receiver will sit once installed on your 2011 Toyota Tundra, but we have not had a chance to install the Curt Front Mount Hitch, #31198, on a 2011 Toyota Tundra yet, so I do not have a specific…

view full answer...

Answer 5

We have the Yakima StraightShot Hitch Extension, #Y69VR and the RockyMounts Hitch Extender, #RKY10008, among others. The problem however is that most manufacturers state these type products are not to be used with accessories on RV hitches. The…

view full answer...

Answer 6

Hey Kate, thanks for reaching out! We do have some SAE extensions for you to check out, and if you don't already have an outlet on your RV with the SAE connector then I also recommend the Outlet #MA23BR. Our SAE extensions come in a 15' Kit…

view full answer...

Answer 7

For your 2018 Toyota Tundra we have the Curt front hitch part #31198 and the Draw Tite part #65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made…

view full answer...

Answer 8

Hello Peter, thanks for reaching out. The Curt Front Hitch #31198 you mentioned is for the 2008-2018 Toyota Land Cruiser, 2008-2021 Toyota Sequoia and 2007-2021 Toyota Tundra. This has not been tested on a Lexus LX 570, so we cannot confirm fitment.…

view full answer...

Answer 9

If your 2022 Toyota Tundra does not have tow hooks then don't worry about that part of the instructions. If you had tow hooks they would be removed to install the front mount hitch and then reattached. When installing the front mount hitch you…

view full answer...

Answer 10

Both the Draw-Tite Front Receiver #65080 and Curt Front Receiver #31198 can be installed on your 2021 Toyota Tundra without cutting the hole in the skid plate. The purpose of the hole is to allow for easier access to the oil filter for routine…

view full answer...

Answer 11

Wheel offset is very similar to backspacing and refers to the location of a wheel's rim in relation to the wheel's center. Most trailer wheels have a 0 offset, but to determine if the wheels on your trailer have one, you will first want to…

view full answer...

Answer 12

Hello Letha, thanks for reaching out. The EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH89CR is compatible with the 2024 Toyota Tundra Limited Hybrid but the skid plate will need to be either trimmed or removed.

view full answer...

Distance from Bolt Hole Center to Center Left to Right on Curt Front Hitch # 31198

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching