What Are Dimensions of Redline Spare Tire Carrier # 413200

Question

Question:

Can you supply the dimensions of the item.

asked by: Mike

0

Expert Reply:

I walked out to our warehouse and measured the Redline Spare Tire Carrier # 413200. I took some pictures of part # 413200 and added some dimensions to the pictures for you.

Click on the pictures to see the dimensions of the Redline Spare Tire Carrier # 413200.

expert reply by: Reno H

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 7

I sure do Steve! To replace your Triton boat trailer's jack, I recommend our etrailer Sidewind Aluminum Jack with Wheel item #e95YV. This is a 1,500 lbs capacity jack, that will provide 12" of travel, and has a built-in wheel for easy moving…

view full answer...

Answer 8

Hey George! Assuming you're looking for a complete kit, the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM98CV you were looking at covers just about everything. This is compatible with 10" - 30" diameter tires,…

view full answer...

Answer 9

Hey Mike, thanks for reaching out. No. The RV Designer On/Off Wall Switch with Bezel and Plate #RD43VR is only available with a standard, non-illuminated rocker switch. If you're looking for the same functionality with an illuminated switch, RV…

view full answer...

Answer 10

Hey Brian! Yep, for your boat trailer, I’d skip the etrailer A-frame drill jack #e38AV since your trailer doesn't have that standard 3-bolt A-frame jack mount. That could be fabricated to fit, but that's a lot of unnecessary work. For a…

view full answer...

Answer 11

Hey Randy, thanks for reaching out. That isn't the typical intended use for the Lippert Spare Tire Winch #LC159056 but I see no reason why you couldn't mount it under a gooseneck neck. As long as you can find a nice secure mounting location,…

view full answer...

Answer 12

Hello Adam, thanks for reaching out. Both of the tires you mentioned, the Kenda #AM10234 and #KE88KV are ST205/75R14 Radial load range C trailer tires. The difference is the type of tire. The #AM10234 is a KR03 tire. This is intended more for paved…

view full answer...

What Are Dimensions of Redline Spare Tire Carrier # 413200

Product Page this Question was Asked From

Continue Researching