Can Taller Hitch Ball be Installed in Curt Ball Mount # C45036

Question

Question:

Hello! Curt Class III Ball Mount with 2inch Ball - 2inch - 7,500 lbs Item # C45036 Can I remove the fixed ball from this product and replace it with rise? Let me know. Thanks.

asked by: Kim

0

Expert Reply:

The ball mount that comes with the Curt part # C45036 has a 1 inch diameter ball hole which means you can install the hitch ball part # C40033 in place of the included ball and have the same diameter hitch ball but 1 inch taller.

expert reply by: Jameson C

0

Answer 1

Hey Glenn. I went down to the warehouse and measured the BulletProof Hitches 2" Hitch Ball item #BPH43RR. From the bottom of the shank to the top of the hitch ball is 5-1/4". This is a 2" hitch ball with a 10,000 lbs capacity. It has a…

view full answer...

Answer 2

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

view full answer...

Answer 3

Hey Carlos. The etrailer Ball Mount Kit item #EBMK2416 has a 1-1/4" ball hole diameter for the shank and fits a 2" receiver. This kit includes both 2" and 2-5/16" hitch balls. It also has a hitch pin and a carrying bag. The ball…

view full answer...

Answer 4

When we installed 2-inch Curt Class III hitch #13354 on a 2009 MDX we found that the top of the receiver opening was indeed 17-inches above ground, although this can vary slightly from car to car depending on the amount of tread wear and factors like…

view full answer...

Answer 5

A vise would be the best solution to hold the 2" Hitch Ball #C40033 while you torque down the nut.

view full answer...

Answer 6

Hi Greg; we do carry a hitch and wiring for your 2025 Sienna. The best hitch is the etrailer #e56RR. This has a 2" receiver, bolt-on installation, and a matte black powder coat finish. It also comes with a limited lifetime warranty. For wiring…

view full answer...

Answer 7

There are very few trailer hitch balls with a rise, and all of them are made of chrome-plated steel, including the 2" trailer hitch balls. Both 2" hitch balls have a 6,000 lb capacity and 1" diameter shank with the difference being the…

view full answer...

Answer 8

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Can Taller Hitch Ball be Installed in Curt Ball Mount # C45036

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching