What are the Dimensions of the BulletProof Hitches 2" Hitch Ball BPH43RR?
Updated 12/08/2025 | Published 11/23/2025
Question:
BulletProof Hitch model BPH43RR TOTAL length from top of ball to end of shank. Also, how thick should the ball platform of the hitch be for this part mine is 3/4inch thick. Thanks
asked by: Glenn G
Expert Reply:
Hey Glenn. I went down to the warehouse and measured the BulletProof Hitches 2" Hitch Ball item # BPH43RR. From the bottom of the shank to the top of the hitch ball is 5-1/4". This is a 2" hitch ball with a 10,000 lbs capacity. It has a 2" long shank that fits a 1" diameter ball mount hole.
3/4" thick ball mounts are pretty standard so you'll be good with the one you have.
What kind of trailer are you towing?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
BulletProof Hitches 2" Hitch Ball - 1" Diameter x 2" Long Shank - Chrome - 10K
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 10000 lbs GTW
- 2 Inch Diameter Ball
- 2 Inch Shank Length
- 1 Inch Diameter Shank
- BulletProof Hitches
more information >
Continue Researching
- Shop: 2-Tang Clevis for BulletProof Hitches Adjustable Mount- 1" Diameter Pin - 14,000 lbs
- Shop: 2-Tang Clevis Attachment for 2-1/2" B&W Tow & Stow Hitches
- Shop: Demco 2-Tang Clevis - Adjustable Channel Mount - Black Paint - 20,000 lbs
- Shop: Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
- Shop: Curt Adjustable Clevis and Pintle Hook Combo with 2" and 2-5/16" Balls - 6,000 lbs
- Shop: 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount - 1" Diameter Pin - 20,000 lbs
- Q&A: What Head and Ball do I Need for My Reese Trunnion Bars with 22210E Stamped on Them?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Circuit Board For A Dometic WH-6GEA
- Q&A: Troubleshooting Curt Assure Trailer Brake Controller C49UR Not Going Into Standby/Sleep Mode
- Q&A: 2 1/2" Shank For Fastway e2 Weight Distribution Hitch
- Q&A: Ball Mounts For Equal-i-zer Extended Weight Distribution 4" Drop Shank
- Q&A: Replacement Westin Hardware For Step Bars 23-0500
- Q&A: How do Westin E-Series Round Nerf Bars 23-0500 Install on 1988-2000 Chevy/GMC C/K
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: The 4 Crucial Choices You'll Make When Buying a Boat Trailer
- Article: How to Mount a Truck Bed Camper
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Jerred H.
12/8/2025
Hey Glenn, how did that 2-inch BulletProof hitch ball work out with your 3/4-inch ball mount? Your feedback could help others checking fit and clearance for the same setup.