Result: trailer hitch ball

Hey Ryan, thanks for reaching out. I went out to our warehouse to measure and compare both ball mounts you mentioned. First I found the etrailer Ball Mount #e99DR you already ordered, and I measured 2-3/4" from the center of the pin hole to…

Hey Eric, thanks for reaching out! As long as the hitch on your Class C RV is rated for weight distribution, you can use the Curt Round Bar Weight Distribution System #C17063 with no issues. When it comes to using it with the 2-1/2" receiver on…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Kevin, the etrailer hitch part #e42TR that you referenced weighs 27 lbs but since this essentially becomes a part of the vehicle chassis it's weight does not end up going against the payload of the vehicle. For a dual hitch setup that can use…

Hey James, thanks for reaching out! I recommend picking up the Blue Ox TrackPro Weight Distribution w/ Sway Control #BLU36FR for your application because it's simple to set up after the initial installation, and it's right in the weight range…

Hey Joe, yes the Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR will fit your 2025 Subaru Outback. But, if you're open to another option, the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT74YR is what I'd go for. This hitch is a bit…

Hey Matt, if the installers of the Draw Tite part #24942 follow the instructions you don't have to worry about any vibration or other issues. The hitch does not come with trailer wiring so I would need to know what your year/make/model is to pick…

Hello Joseph, I'm glad to hear that the ones for your Suburban were such a great fit! For your 2022 Nissan Armada, they do not make a custom-fit option. After reviewing the universal towing mirrors, the CIPA Universal Towing Mirrors - Clip On -…

Hey Steve! You're already on the right track with the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems #EQ95-01-5950. This is exactly what you need to install a WDH on your boat trailer. Go ahead and measure 27" - 32"…

Hey Chris, it sounds like you are looking for a replacement Blue Ox weight distribution head for your system which we have with the part #BLU54XR which fits the SwayPro systems.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.