Front-Mount Hitch and Front Suspension Coil Helper Spring for 2016 Ford F-150 4x4

Question

Question:

I didnt find a video for 2016 Ford?

asked by: Tom

0

Expert Reply:

The Curt front-mount hitch # C31068 is not a fit for your 2016 Ford F-150; it fits only older F-150s up to model year 2014.

For your truck we do have a confirmed fit for a front hitch, Draw-Tite # 65067. This offers 500-lbs vertical load and 9000-lbs line pull ratings and installs without drilling. It will require a bit of fascia trimming.

We have not yet had a local customer bring in their truck for installation so we have no video at this point but you can refer to the linked written instructions for step-by-step guidance. Both hitches include all required hardware. A helpful article on hitch installations is linked for you too.

If you are planning to use a snow plow like # K2AVAL8219 or other heavy front-hitch-mount accessory you might also consider a set of front jounce helper springs to stiffen the front suspension.

The USA-made SumoSprings Custom Coil Helper Springs # CSS-1094F offer simple installation and work to progressively stiffen the front suspension only when it is under load but they will not otherwise change your unloaded ride quality. This and their moderate cost make them a great upgrade when using a front-hitch accessory.

expert reply by: Adam R

0

Answer 1

Yes, the SumoSprings Custom Front Axle Helper Springs, part #CSS-1094F, fit the stock front coil springs on your 2010 F-150. This product fits both 2- and 4-wheel drive models including the SVT Raptor versions. The kit consists of two polyurethane…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 9

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring.

view full answer...

Front-Mount Hitch and Front Suspension Coil Helper Spring for 2016 Ford F-150 4x4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching