Recommendation for Wiring 4-Way on 2016 Chevy Express Van for Reverse Lights

Published 12/14/2017

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(273)

$35.04

Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter

(262)

$18.40

Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design

(89)

$12.76

Hook Probe Circuit Tester

(60)

$12.55

Question:

chevy express van. Does this have reverse light function?

asked by: Jamie

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness # 55540 referenced in your question, which is confirmed to fit your 2016 Chevy Express Van, does not by itself have a reverse light wire. This harness will provide a 4-Way flat that will power the trailer's basic signal lights.

In order to tap into your reverse lights, I recommend simply using the Tow Ready 4 Pole to 5 Pole Adapter # 20036 after you have the above 4-Way installed. This will plug directly into the 4-Way flat to provide you with a 5 pole flat. The included blue wire will just need to be spliced into the reverse light wire on your vehicle, which you can find using a circuit tester like # PTW2993.

If your trailer does not also have a 5-Way flat connector, you can install the Hopkins Endurance 5-Way Flat # HM47910.

I have attached a couple demonstration videos on these products that you can also check out.