Is There a Dual Hitch Receiver Adapter for 1-1/4 Inch Class I and Class II Trailer Hitches

Question

Question:

Do you have a dual hitch reciever for 1 1/4inch size? All i see is 2inch and bigger.

asked by: Leekirsch54

0

Expert Reply:

There is not a dual hitch receiver for the 1-1/4 inch receivers as they are not able to handle the torque due to the tongue weight location. The tongue weight of the hitch is reduced by 50% when using an adapter, so it really wouldn't be worth using for most applications.

expert reply by: Jason S

0

Stephen G.

3/1/2020

Is the tongue weight reduced by half for all of these dual hitch receivers? Including the 2? What if the upper receiver is only holding 50 lbs? Would you explain how this works?

Chris R.

3/3/2020

We do state that all of our dual hitch adapters will reduce the tongue weight capacity of your trailer hitch by 50 percent (if your hitch has a 300 pound tongue weight limit this is reduced to 150 pounds). This is due to the extra leverage and length that's created by the adapter, along with the simple act of mounting an additional component. All of this combines to decrease the stability of the connection point. You just need to make sure the combined tongue weight of your accessories and trailer don't exceed the reduced limit.

Rudy C.

3/21/2025

I'm also looking for this my trailers spare tire hangs on the 1-1/4 hitch reciver bit i also want to add my bicycle rack.

Jon G.

3/21/2025

@RudyC Does your trailer have a bumper on it? If so, what size? We could get a spare tire carrier that attaches to the bumper!

Answer 1

Congrats on the possible purchase! To add a hitch to a 2018 Honda HR-V, I recommend the Curt item #C11416. This class I hitch with a 1-1/4" receiver is custom fit and bolts to an HR-V with included hardware. It has a 200 lbs tongue weight…

view full answer...

Answer 2

Yes, there is. To add a hitch to a 2024 Jeep Grand Cherokee 4xe you will want the Curt Trailer item #C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs…

view full answer...

Answer 3

Hey Thomas! The LED on the Redarc Tow-Pro Liberty Brake Controller #RED24FR will still be visible with the Universal Mounting Panel #RED37FR. If you take a look at the picture below you will see it is illuminated blue in the dash. For a plug and play…

view full answer...

Answer 4

That's accurate Michael! However, the Curt Hitch item #C92UR still fits the 2025 Honda Civic Hybrid sedan and hatchback so long as yours does not have the center exhaust. The Curt Hitch item #C92UR wasn't intended to be used on the hybrids is…

view full answer...

Answer 5

It does now. The 1-/4 inch hitch aligner is part #e58ZR. It's just like the 2 inch version, part #e98942, except for 1-1/4 inch hitches.

view full answer...

Answer 6

The Trailer Hitch Adapter #e93YR is the closest extender/riser to the Trailer Hitch Extender #e68YR you found. The adapter does change from the 1-1/4" receiver to a 2" receiver for the accessory. You would need the Reducer #e63YR to get…

view full answer...

Answer 7

It's not a great idea to go with a thinner hitch lock but we have the collar hitch aligner part #e98942 which would help you get the exact same alignment everytime so that you can keep using your current hitch lock.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Is There a Dual Hitch Receiver Adapter for 1-1/4 Inch Class I and Class II Trailer Hitches

Product Page this Question was Asked From

Continue Researching