1-1/4" Trailer Hitch Riser For 1-1/4" Hitch Mounted Accessories

Question

Question:

Do you have this extender with a riser?

asked by: James W

0

Expert Reply:

The Trailer Hitch Adapter # e93YR is the closest extender/riser to the Trailer Hitch Extender # e68YR you found. The adapter does change from the 1-1/4" receiver to a 2" receiver for the accessory. You would need the Reducer # e63YR to get back down to a 1-1/4" receiver.

Be sure to consider both the extender you found and the adapter that I gave you above will reduce the capacity of the receiver by 50%.

expert reply by: Bud M

0

Answer 1

It does now. The 1-/4 inch hitch aligner is part #e58ZR. It's just like the 2 inch version, part #e98942, except for 1-1/4 inch hitches.

view full answer...

Answer 2

There is not a dual hitch receiver for the 1-1/4 inch receivers as they are not able to handle the torque due to the tongue weight location. The tongue weight of the hitch is reduced by 50% when using an adapter, so it really wouldn't be worth…

view full answer...

Answer 3

Roller #RM-050 is a good option for a Class III trailer hitch on your 2006 Honda Odyssey. It does hang down lower than the hitch receiver so it will actually make contact with the ground sooner than if the roller were not on it. This roller will not…

view full answer...

Answer 4

It's not a great idea to go with a thinner hitch lock but we have the collar hitch aligner part #e98942 which would help you get the exact same alignment everytime so that you can keep using your current hitch lock.

view full answer...

Answer 5

Hello Luc, thanks for reaching out. The SnapPad #SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The #SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner…

view full answer...

Answer 6

Hey Louis, thanks for reaching out! What you need is the Roadmaster Front Anti-Sway Bar #RM-1139-180. You'll use your current end links and then this will give you a more robust anti-sway bar. I've attached an installation video for you to…

view full answer...

Answer 7

For a hitch for your 2015 Toyota Sienna I highly recommend the etrailer hitch part #e98853 which has a hidden crosstube that allows for a more concealed look and also helps with ground clearance. Then for a bike rack the Thule Apex XT part #TH9026XT…

view full answer...

Answer 8

Hello Dan, thanks for reaching out. The Kuat Transfer V2 Bike Rack for 4 Bikes #KU77FR is indeed compatible with the etrailer Class 3 Hitch #e98853. The hitch has a 2" receiver and a 525 lb tongue weight capacity so more than enough for 4 bikes.…

view full answer...

Answer 9

Hey Craig, since the 1 inch diameter ball mount shank is used on lower capacity ball mounts there aren't any 2-5/16 inch hitch balls made for that size hole that also have a 1 inch rise built into them. It's basically such a rare request for…

view full answer...

Answer 10

To add a trailer hitch to your 2023 Toyota Venza, I recommend the etrailer Hitch item #e25AR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 11

Hey Robert! Yes, your 2023 Traverse FWD can be flat towed. This varies from vehicle to vehicle, and if it was allowed for AWD and not FWD it would be called out in the manual. I also pulled up the manual and it does not differentiate between the two…

view full answer...

1-1/4" Trailer Hitch Riser For 1-1/4" Hitch Mounted Accessories

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching