Should Timbren Spacers or Off-Road Bumpstops be Used for a 2015 Toyota Tundra with 2-1/4" Lift

Question

Question:

What is the length of the active offroad bump stop? Would it firm or a little give?

asked by: Jim

1

Helpful Expert Reply:

The Timbren Spacers, like the 1" # A25723-90AH00 or 1/2" # TA25722-90P00, are designed to be used with a Timbren suspension enhancement system so you will not want to use them with your factory bumpstops.

I spoke with my contact at Timbren about using the Timbren Active Off-Road Bumpstops # TABSTOF with the 2-1/4" lift on your 2015 Toyota Tundra and my contact said that no spacers will be needed when installing these.

The Off-Road Bumpstops are rated for 1,800 lbs, but keep in mind that any suspension enhancement system will not increase your weight capacity. It is designed to enhance a normal functioning suspension system.

expert reply by: Jon G

1

Jim

11/27/2017

What is the length of the active offroad bump stop? Would it firm or a little give?

Jon G.

11/27/2017

I spoke with my contact at Timbren who said that the Timbren Active Off-Road Bumpstops # TABSTOF have a height of 1-7/8" and have a 2-5/16" diameter. These bumpstops are firm but they do have a little bit of give and are an upgrade to your current bumpstops.

Answer 1

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

view full answer...

Answer 2

To add a 1" spacer #A25723-90AH00 to the Timbren Active Off-Road Bumpstops #TABSOSR you were looking at for your 2014 Toyota Tundra you will need to purchase two grade 5 or 8 3/8" x 2-1/2" F/T UNC bolts from your local hardware store.…

view full answer...

Answer 3

For your 2013 Toyota Tundra that is towing a 6,500 lb travel trailer I'd go with the Timbren kit part #TABSOSR to help support the rear of it and reduce sag as this will give you up to an additional 3,600 lbs of support if needed. Other kits…

view full answer...

Answer 4

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 5

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

view full answer...

Answer 6

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

view full answer...

Answer 7

We have both front and rear Timbren Suspension Enhancement Systems for your 2015 Ford F-150. For the front of your truck you will want to use part #TFF150G and for the rear you will want to use part #TFRTT1504E. Timbren recommends a distance of…

view full answer...

Answer 8

The best way to fix the sag you are getting on your lifted 2018 Ford F-150 when towing a trailer is to use the Timbren Rear Suspension Enhancement System #TFR1504E which is designed for this exact situation - reduce the amount of sag on a truck when…

view full answer...

Answer 9

If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…

view full answer...

Answer 10

While the Timbren Rear Suspension Enhancement System #TFR1504E may be able to technically fit without using the spacer, it will likely not offer you the best performance. It is supposed to be pretty tight and without the use of the spacer, the…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

I have a solution for you, but there are no Supersprings for the 2WD versions of your 2017 Toyota Tacoma. Instead you would want the Timbren kit part #TTORTUN4 which is confirmed as a fit and would provide you with more than enough suspension support…

view full answer...

Should Timbren Spacers or Off-Road Bumpstops be Used for a 2015 Toyota Tundra with 2-1/4" Lift

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching