Using the Timbren Suspension Enhancement System On a Lifted 2015 Ford F-150

Updated 10/17/2017 | Published 10/16/2017

Products Featured in This Question

Timbren Rear Suspension Enhancement System

(6322)

$269.36

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(140)

$16.57

Timbren 1/2" Spacer for Raised Frame Vehicles

(59)

$11.71

Timbren Front Suspension Enhancement System

(665)

$269.36

Timbren Suspension Enhancement System - Severe Service - Rear Axle

(842)

$269.36

Question:

Im looking for an added little bit of support for towing a boat trailer with my 15 f150 1.5inch front level to prevent sag. It probably would be almost dead level if I hadnt raised the front. In the mix are Timbrens, add a leaf, and airbags. What is the distance between the timbren and the axle? the pics looks like a long ways, but the instruction looks to be only a couple inches max.

asked by: Travis

Expert Reply:

We have both front and rear Timbren Suspension Enhancement Systems for your 2015 Ford F-150. For the front of your truck you will want to use part # TFF150G and for the rear you will want to use part # TFRTT1504E. Timbren recommends a distance of 1" from the bottom of the bump stop to the top of the contact point. You can achieve this distance on trucks that are lifted using increments of the Timbren 1/2" Spacer part # TA25722-90P00 and the Timbren 1" Spacer part # A25723-90AH00 until the 1" of space is acquired.

expert reply by: Conner L