Recommended Steering Stabilizer for 2008 Workhorse W22 Chassis Class A RV

Question

Question:

I need a steering stabilizer for a 2008 W22 workhorse class A RV.

asked by: Dave T

1

Helpful Expert Reply:

For your 2008 Workhorse W22 Chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA. This system has a tempered steel spring that works when compressed to push back to center and when extended to pull back to center. It helps minimize wander and will help you maintain control in the event of crosswinds, rut tracking, uneven lanes, and even a tire blowout. It will install in about 1 hour and will give you far less driving fatigue.

expert reply by: Jason S

1

Ray S.

5/13/2025

My 2007 W22 came with Bilstein Stabilizer. Would I be able to use my existing brackets and swap out the old Stabilizer with the Roadmaster? Thank you.

Reply

Jesse M.

5/19/2025

@RayS Hello Ray. We have not tested the Roadmaster stabilizer compatibility with the Bilstein brackets, since we do not carry the Bilstein brand, but generally those kind of parts would be brand specific and would not be cross compatible. So I would have to recommend using the brackets that come with the Roadmaster stabilizer.

Reply

Answer 1

No, there is not and there is not a work around available that allows you to control the camera's tilt feature without the original monitor. We get this question often and I am sorry but upgrading your monitor will cost you that function. To…

view full answer...

Answer 2

Hey Jerrie, the current wiring of your Voyager system could be reused so that you could replace the monitor you have. The correct monitor replacement would be the part #VO34FR.

view full answer...

Answer 3

In regards to the Roadmaster Reflex Steering Stabilizer part #RM-RBK13-RSSA, the chassis bracket which is the larger of the two will be installed on the passenger side preferably but can be installed on the driver side as well. That said, I don't…

view full answer...

Answer 4

Hello Joe, Great question. The Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA is a great fit for you 2002 Newmar on a W22 Workhorse Chassis. The good news is that it is not going to put any extra…

view full answer...

Answer 5

For a 2005 Workhorse W22 chassis you will need steering stabilizer and mounting kit #RM-RBK13-RSSA. Steering stabilizer #RM-RSSB is just the stabilizer by itself, no install kit, and it is also not the recommended one for the W22. I have also…

view full answer...

Answer 6

The front trac bar that comes in the Roadmaster Kit #RM-1259-106 that you referenced will do the same job as a steering stabilizer but won't be as effective. For the best of both worlds I recommend going with the front Anti-Sway Bar #RM-1259-105…

view full answer...

Answer 7

According to the original sales brochure I looked up, your 2005 Newmar Mountain Aire 3778 was built on the Workhorse W-24 chassis. The same brochure states that the overall length of your coach is 37 feet 5 inches. Given that information, you'd…

view full answer...

Answer 8

Based on your images it appears you have the Peterson Driver #432000 and Passenger #431800 lights currently on your 1965 Selma utility trailer. If you prefer something different the LED Trailer Tail Light #STL413RFHXB would be a good option with a…

view full answer...

Answer 9

That's a really good question. The issue that Ford has with the sway bars they install on their chassis is that since they do not install the body of the RV onto the chassis it's really hard for them to come up with a decent sway bar in their…

view full answer...

Answer 10

Aftermarket upgrade suspension kits will provide a clear improvement over the stock components in your 27-foot 2015 F-53-based Jayco Alante RV. For the V10-equipped F-53 the correct steering stabilizer from Roadmaster is indeed part #RM-RBK22-RSSA…

view full answer...