Review of the MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height Video

Hey Karl! Steps like the MORryde Quick Connect RV Steps #MR85HR fit based on entry height. What is your measurement? There isn't a minimum distance from the top of the threshold per se but, if you were already at 21-1/2" and you have to…

Hey Steve! Yes, the #PD79RR is the same as the Progressive Dynamics PD9360V. The #PD79RR is just our part number. This is a great replacement for your WFCO WF-9855 and is compatible with flooded lead acid, AGM, and LiFePO4 batteries. If you need…

The MORryde Quick Connect RV Steps item #MR85HR measure 25-1/2" wide x 11" deep and anywhere from 21-1/2" - 27-1/2" long depending on how far you have the bottom legs extended. Not sure if you're planning on closing them all…

The MORryde Quick Connect RV Steps #MR85HR is only able to mount with the bracket in a vertical position so that the clamp can grip the post on the bracket. The step you have pictured is an OEM option that's custom made for that specific trailer…

I spoke with my contact at B&W about the 4 inch offset ball part #BWGNXA4085. They told me that they do not offer a 15 inch offset coupler so they could not recommend using the 2 together. They did say the Extend-A-Goose Gooseneck Coupler, part…

The ball extension part #BWGNXA4085 actually gives more clearance than a gooseneck coupler extension. Reason being that with the ball extension you move the pivot point back but with the coupler extension the offset's additional clearance…

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

The MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height #MR85HR is the newer model to the steps part MR73RR you referenced. The upgraded differences are that the newer model has a wider top step, they added the quick release…

When installing the MORryde Quick Connect RV Steps #MR85HR, there is not a set way to ensure the screws are not hitting anything such as wiring. That being said, the MORryde Quick Connect RV Steps #MR85HR do not use lag bolts for installation. There…

Based on the measurements you provided of your 2019 Keystone Passport 171 EXP you'll need the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR26RR. These steps have an entry height range of 25" - 29" and…

In order for the MORryde StepAbove #MR26RR to fold down you'd need to have between 25 and 29 inches from the threshold to the ground on your RV.

Since you can't fold in the steps on your 2018 Winnebago Minnie I recommend the MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps #MR85HR. The mounting bracket for these steps attaches on the outside below…