Dimensions for Attachment of the Pro Series Square Drop Leg Jack 12,000 Lbs. # PS1400950376

Question

Question:

I would like to know all of the dimensions for this jack. I am designing the attach points to a trailer and would like to know what the recommended attach method is, or what size tubing would be best to weld the jack to. Can you send me the owners manual for this particular model and the xyz dimensions of the whole trailer.

asked by: Jonathan M

0

Expert Reply:

I spoke with my contact at Reese and he sent me dimensions of the Pro Series Jack, item # PS14009503676. I have included a drawing containing these dimensions for you to review.

There is no owners manual included with these Jacks at this time.

The recommended installation for this jack is direct welding to the trailer frame.

expert reply by: Robert G

0

click to enlarge

Answer 1

Unlike costlier brands of trailer jack the entry-level Pro Series line is not supported with the same repair/replacement parts availability as with the upper tier sister brands like Bulldog and Fulton. The few parts we have available to us are shown…

view full answer...

Answer 2

Economy jacks like the Pro Series #PSEA20000103 do not have the same availability of replacement parts as the comparable products that are more costly. This is why they cost less. Pro Series does offer a replacement handle #PS1400920383 for their…

view full answer...

Answer 3

I spoke with my contact at Bulldog regarding the Replacement Bearing for Bulldog Square Jacks, #BD001015. He stated that the inside diameter is 0.876 inches. This is 1 thousand of an inch larger than 7/8 inches. The outer diameter is 2 inches. None…

view full answer...

Answer 4

I attached a picture that details how to disassemble the Bulldog 12,000 lb jacks.

view full answer...

Answer 5

Thanks for reaching out! To replace the inner gears of your Bulldog square jack you need the Bulldog Replacement Gear Kit #BD500212 which I confirmed with my contact at Bulldog will work for your 182417 jack. I've attached a few videos for you to…

view full answer...

Answer 6

Could you get me the brand of the jack possibly?

view full answer...

Answer 7

The replacement parts we have for the Bulldog Square Jack #BD182500 are a Replacement Gear Kit #BD500212 and a Replacement Screw and Nut Kit #BD500217. These are the two most likely aspects of the jack to be causing your problem. I have attached the…

view full answer...

Answer 8

I spoke with my contact at Bulldog regarding the Replacement Bearing for Bulldog Square Jacks, #BD001015. He stated that the inside diameter is 0.876 inches. This is 1 thousand of an inch larger than 7/8 inches. The thickness of the bearing is also…

view full answer...

Answer 9

I spoke with my contact at Bulldog regarding the Replacement Bearing for Bulldog Square Jacks, #BD001015. He stated that the inside diameter is 0.876 inches. This is 1 thousand of an inch larger than 7/8 inches. The outer diameter is 2 inches. We…

view full answer...

Answer 10

The screw and nut assembly, #BD500250, fits Bulldog jacks rated at 10,000 lb lift and 12,000 lb support. We also have kit, #BD500217, which is designed to fit Bulldog series 182 jacks from 2003 to present with a 12,000 lb capacity. I have included a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Dimensions for Attachment of the Pro Series Square Drop Leg Jack 12,000 Lbs. # PS1400950376

Continue Researching