Replacement Gears for Bulldog 10K Square Jack 182417

Question

Question:

I have a bulldog square jack 10k the product number #182417 I need parts I cant find the replacement parts for my jack.

asked by: William R

0

Expert Reply:

Thanks for reaching out!

To replace the inner gears of your Bulldog square jack you need the Bulldog Replacement Gear Kit # BD500212 which I confirmed with my contact at Bulldog will work for your 182417 jack.

I've attached a few videos for you to check out as well.

expert reply by: Jon G

0

Answer 1

With your Bulldog Heavy-Duty, Rack-and-Gear Jack BD165412 being obsolete you will want to replace your jack with one like the A-Frame Trailer Jack #TJA-2000S-B. This jack has 2,000lbs of lift capacity which you can add a Caster #JC-102 and extends up…

view full answer...

Answer 2

If you do mostly highway driving then radial tires like the Karrier ST175/80R13 Trailer Tire #AM10210 will be all-around better as they have a better design to say cool at highway speeds, but radial doesn't necessarily have a better resistance to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Gears for Bulldog 10K Square Jack 182417

Featured Help Information

Miscellaneous Media

Continue Researching