If you’re done dealing with dim bulbs or frequent replacements, this mini clearance and side marker light is built to last. With a single premium red LED rated for up to 100,000 hours, it delivers a bright, crisp light while drawing only 0.06–0.08 amps at 9–14V DC. The efficient design keeps power use low without sacrificing visibility, making it a dependable solution for anyone upgrading to modern LED lighting.
For trailers that see water or harsh weather, this light is built to handle it. The housing and lens are sealed together into one waterproof unit, and the circuit board is encapsulated with TecSeal urethane potting for guaranteed protection from moisture and dust. Rated IP68, it’s completely dustproof and submersible—ready for use anywhere you tow, launch, or store your trailer.
Visibility counts when signaling or marking your trailer’s position. This PC-rated light produces a full 180-degree arc of red light—90 degrees on each side of centerline—so it can act as both a clearance and side marker in one compact unit. When mounted at a 45-degree angle on the rear corner, it provides broad coverage that meets or exceeds FMVSS 108 standards.
Space is often limited on trailers, and this light makes fitting it easy. Measuring just 1" in diameter by 7/8" thick (3/4" without the grommet), it installs flush into a standard 3/4" hole using the included grommet. The hardwired setup uses a simple two-wire design—black for ground, white for power—so you can mount it at any orientation without fuss.
This light’s polycarbonate housing with UV-resistant lens is made for durability in tough environments. It resists impact and fading while protecting the internal components from vibration and wear. Whether exposed to sun, road grime, or water spray, it keeps shining bright with consistent performance over time.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. And today, we're gonna take a look at this recessed mount, mini red LED, side marker, boat trailer light. This waterproof, mini LED red light functions as a side marker and clearance light for your trailer when properly mounted. And as you can see, I already have it connected to 12 volt power to give you an idea just how bright this is. This is, of course, with my studio lights on.
Let me turn my studio lights off just to kind of give you a better idea of its brightness. And you can see the red light that it casts. And again, just a really bright light. This is a single, premium LED. And it's energy efficient, long-lasting.
It's gonna be vibration resistant. It's rated up to 100,000 hours of operation. And this is also a PC rated light, which means that it can produce a 90 degree angle of light to either of its central line for a total of 180 degrees of coverage as you can see here. This beam pattern can be clearly seen when you're standing directly in front of the light, as well as when you are standing off to the side on either side of this light. Now, this is a durable, UV resistant, red lens cover.
This is from a distance, but unfortunately, my camera doesn't focus real well from a distance. This is a durable, UV resistant, red lens over a red LED, and a sealed waterproof housing and lens unit. The waterproof construction of this light is going to make it ideal for use on trailers that may be submerged like a boat trailer. And the circuit board is of a military grade construction. And the urethane potting offers better protection than the common epoxy potting.
Now, this is again, a recessed mount installation with the included grommet. It requires a 3/4 of an inch diameter cut-out. And you can add a stainless steel trim ring, which is sold separately, for a finished look. This hardwires to your application with this 7 1/2 inch long pigtail. This is compatible with 12 volt DC systems and this meets or exceeds FMVSS 108 standards. The dimension is sitting right at an inch in diameter. Let me line that up here a little bit better for you. So, as you can see, about an inch in diameter. And the overall thickness, we're sitting right at about 7/8 of an inch thick. The input voltage is gonna be nine volts to 14 volts. And the power draw is gonna be 0.06 to 0.08 amps. And the wire length, again, is sitting right at about 7 1/2 inches long. And this has a 68 IP rating. And it also has a limited lifetime warranty. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Great product
Parts were as descibed at a great price and arrived in a timely manner.
As agreed
GREAT
Matched my current lights and easy to i nstall,
Easy to navigate the website for ordering.
Good products and very quick to ship.
Videos were helpful in seeing the actual item.
Glad I chose you over others.
Ground was black wire. Test polarity before soldering joints together!
This works perfect, I'm very happy with this marker light. Thank you.
Work great. I installed three in back of boat trailer. Been working even when backing boat in and out of the water.
Perfect replacement
Would definitely purchase again! These are my favorite style of side marker lighting.
Exactly what I needed
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
These little lights are bright and perfect for a 3/4" hole. Easy to install and wire up.
Great Product Pricing
They are great just what i was looking for super Brite and easy install
Great replacement light however the wiring is reversed from the lamps on my unit.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.