Thrust Bearing Recommendation for a Trailer Jack that Measures 2 inches OD and 7/8 inch ID
Updated 05/11/2016 | Published 05/10/2016
Question:
i have a thrust bearing for a jack dimesions are 2.00 od 7/8 id and .62 wide
asked by: MIke
0
Expert Reply:
I spoke with my contact at Bulldog regarding the Replacement Bearing for Bulldog Square Jacks, # BD001015. He stated that the inside diameter is 0.876 inches. This is 1 thousand of an inch larger than 7/8 inches.
The thickness of the bearing is also 5/8 of an inch which is .62 like what you have.
Based on what you listed this would be the best option we have.
expert reply by:
Jameson C
0
