Recommended Trailer Hitch and Wiring Harness for a 2005 Porsche Cayenne
Updated 07/01/2020 | Published 08/08/2017
Products Featured in This Question
Question:
I need to add a tow hitch to my 2005 Porsche Cayenne with wiring harness. There is tons of information on the web that states if you do not use OEM wiring you will get error codes to the PCM module. Can you recommend the proper wiring harness and if by chance you have a Porsche Cayenne install video link I would be forever grateful.
asked by: Steve T
Expert Reply:
For a wiring harness that is compatible with your 2005 Porsche Cayenne, I recommend using the 4 Pole Trailer Connector part # C59496 as this wiring harness has an install kit included which will aid install. Unfortunately, we have not had a chance to make an video of this harness on a 2005 Porsche Cayenne yet. I spoke to my contact at Curt and he was not able to confirm nor deny the error code messages.
The only hitch receiver available for your vehicle is the Curt Trailer Hitch Receiver part # 13220. This is a Class III rated trailer hitch receiver with a 2" opening. It is capable of hauling up to 6,000 lbs. of gross trailer weight (GTW) and 600 lbs. of tongue weight (TW). You will need to check your vehicle's towing capacity and abide by the lesser of the two ratings.
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- Universal Fit
- 4 Flat
- Plug and Lead
- Splice-In
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Search Results: trailer tires and wheels
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: How to Choose a Trailer Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch and Wiring for 2027 Kia Telluride
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Video: Clean Up Your Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer hitch ball mount
- Q&A: Clearance Differences Between Hitches For A 2026 Honda Odyssey EX-L
on Custom Fit Vehicle Wiring
Wael F.
6/28/2020
I have the Curt hitch installed on my cayenne turbo 2005.... I now have a 4 pin trailer... I would like to connect it to the cayenne, but it's not clear if it will be an issue with light error code... Any harness that avoids the errors? Or splicing the wires will not make an error in my dash? Also can I make it a 7 pin connector?