Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2014 Nissan Altima
These items fit your vehicle
2014 Nissan Altima
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is built for real-world towing and accessory use. With a 6,000-lb gross trailer weight rating and 600-lb tongue weight, it’s designed to handle small campers, boats, and utility trailers without breaking a sweat. The 2" x 2" receiver works with the most common bike racks, cargo carriers, and ball mounts, so you can swap between hauling gear and towing jobs using the same setup.
You don’t need a lift or special tools to get this hitch on your vehicle. The fully welded design bolts directly to the frame using factory attachment points, so there’s no welding or drilling involved. It comes with a complete hardware kit and clear instructions, making it a solid choice for driveway installs or weekend projects.
The square-tube steel construction is finished with a gloss black powder coat layered over a protective base coat. That combination helps fight off corrosion from rain, snow, and road salt while keeping the hitch looking clean for years. The sturdy build and robotic welds give the receiver lasting strength for towing or carrying heavy loads.
The concealed cross tube keeps most of the hitch tucked out of sight, leaving only the receiver visible below the bumper. That low-profile look gives you a tidy, OEM-style appearance while preserving ground clearance for daily driving or off-road trips.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Toureg Trailer HitchThe service, product and direction that I received from this company was phenomenal. Really, exceptional. In this day and age there are not too many companies that come even close to what etrailer.com delivered on.
I had hesitation on a DIY install of a trailer hitch on my 2008 Touareg. I submitted a request for info. and received detail response to my questions in addition to instructions for the install.
Turned out to be a breeze, no problems whatsoever.
Thanks to everyone at etrailer. Awesome
I’m very pleased with the hitch. I was able to install it on my Q7 in about 1 1/2 to 2 hours, and found the installation instructions to be very straightforward. The trickiest part was removing the bumper cover, so I just took my time and followed the instructions carefully. So far, so good.
Great hitch! Install on '08 VW Touareg was easier than I had expected...etrailer you tube video install how to was invaluable! We've pulled trailers with ease to/from AZ and IL.
Everything about it is good. It fit perfect. Just a tiny bit of surface rust starting after a year in salty Michigan in the receiver area where paint had been slightly rubbed off. Nothing that wouldn't happen on any hitch.
The Curt trailer hitch is super easy to install. Haven't towed anything with it yet. But it's definitely a solid hitch and I don't foresee any problems towing a trailer. I spoke with Dena on the phone and she handled a return and was a huge help in finding what I was looking for. She also followed up to check on the installation. Top notch customer service!
Very good product but the fit wasn't perfect. It bolted up no issues, and installation was pretty much like the video. However when putting the bumper cover back on the 2" hitch receiver hits the fascia a bit. That made it very difficult to re-screw in the lower 4 bolts of the bumper fascia without bending the metal support (sheet metal) that the lower fascia bolts back into.
I ordered this receiver hitch for my 2006 VW touareg. It is very durable and good quality! Only recommendation would be to have some help with starting the bolts for the installation, it can be heavy to hold and try to put the bolts in when you're by yourself. (It can be done though as I did). I look forward to putting the hitch to use!
Love my trailer hitch. It was easy to install and performed perfectly. Towed a 5X9 enclosed haul trailer from San Jose Ca. to Prescott Az.... no problem!
Product arrived in a timely manner, great price point. This is the third hitch and wiring kit I have purchased form etrailer.com. The help videos made it clear how to install hitch and wiring kits. I am a very satisfied customer and will returning here for the next one.
Packaged great! Very easy to install, I have taken the front bumper off. That helped me when taking the rear bumper off. I knew what to look for. I can not stress enough how easy this was to install!! The manufacture bumper came off no problems and the hitch looks great! Sorry I did not think to take a picture.... I guess I completed the job to quick! Save yourself some money and buy this and do it yourself. I spent around $***. The local hitch installer wanted almost $500.
I like the product. Josh from etrailer was very helpful! I install it myself and save a couple hundred if I bring it to a shop for install. It was installed on a 2006 Cayenne. You would have to trim your bumper to get the hitch to stick out. Overall I’m very satisfied with my purchase. I have not connected the wiring for the tail/turn/brake lights module yet. It’s going to be use for bike rack for now anyway.
Not only is this hitch a great product, etrailer.com is a great company. I work in customer support and I must say this is the best customer support I have ever seen. I ordered this hitch Friday night and it shipped Saturday. I received an email from etrailer.com literally an hour after the hitch arrived with a link to an installation video which made installation a breeze. The video was very detailed. Do not hesitate to order any of your towing products from this company.
Thank you etrailer.com,
Travis
Nicely made and heavy duty. But pushing the bumper up like 1/4 inch. So make a dent on the bumper.
And a chain hookup is to deep. And sticking out on the side like big ears. So hard to mount the wiring harness.
Bottom line. It is BAD design.
I end to buy a use oem.
Fitment was perfect on a 2004 Porsche Cayenne Turbo. The bolts provided did not fit (wrong thread size), but the OEM bolts were fine. The bumper cover required trimming, I used a die-cutter air tool. The finished product came out looking extremely clean, like a factory fit... and was significantly more affordable than the OEM Porsche hitch.
My husband install this product on our 2004 Touareg in less than 1 hour by himself. We are very pleased with this product considering the dealer wanted a $1000 and they were not sure if they could do it. We ordered the product for standard delivery but the company upgraded are shipping for free and we received the product in two days. It was great to acutally receive something free during hard economic times. We received emails right after to let us know our order was received and additional email letting us know the product was shipped. Thanks etrailer!!!
2005 Porsche Cayenne S - Easy bolt on solution, did it in 2 hours, nothing particularly tricky.. used a cutting wheel on the plastic to trim around hitch area while the bumper was off. other than that, it was totally straight forward. instructions are adequate, shipping was fast, and most importantly, i save $2200 by not taking it to the dealer. what a joke what they try to to charge.
Cost effective alternative to Vehicle manufacturers product. I did not install it myself, as it can be labor intensive and w/o the right tools or knowledge you can cause damage to body panels. Still after paying a body/ mechanical shop the $200 to install it, it was worth it and less expensive than a factory unit.
Took me half a day to install, but I'm in no hurry. The cutout for the plastic fascia on my 2005 Porsche Cayenne needed to be 4 x 8 inches.
Installed this on my 2008 Porsche Cayenne build. Works as intended!
I ordered this Curt hitch for the mighty Touareg (2010 V6 gasser). Shipping & delivery were great. I took an afternoon to install it using the great directions from Curt and from etrailer.com. The hitch is exactly what you expect, looks great, and doesn't stick out too far from the Touareg. We've used it for our 4-bike Hollywood rack (also bought here on etrailer) and it's been awesome!
Installation is pretty straight forward and easy. It took me around 3 hours to complete the whole installation. It could have been a lot less if I had electric or pneumatic tools.
Great Hitch, fit perfectly as advertised. Did it at night with my friend and it took us 2 hours to install . Perhaps in the light of day it would have been easier. Instructions need to be updated as there were screws we and nuts that we ended up figuring out ourselves. Better instructions would have allowed us to install even faster because part of the time was spend looking for the reason bumper wasn't coming off.
Can't wait to use my newly installed hitch. Thanks etrailer.com!!!
The YouTube video from etrailer was great, it help me put my hitch on the Audi without no background on mechanic with the help of my 12 years son. I plan to use it for the bike rack
Thank you guys for the product
Everything went great. From ordering to installation. The videos were extremely helpful. Knowing what tools I needed made install go smooth. It only took me 2 hours by myself to install.
I installed the unit on my 2012 Audi Q7 TDI - with Regards to the Trailer Hitch itself = A+. If you plan to install this yourself - pay attention to the 10 out of 10 on the difficulty scale when given the lack of details within the instructions. It took me a good 4 hours to complete, as I kept second guessing the basic instructions provided and searched the blog/youtube etc.. for needed details. The Q7 has 4 screws within each wheel well and 4- 10mm nuts that need to be removed from within the spare tire well. Once all these are removed you have to be very aggressive in order to pull away the Fascia from its wheel well clips/retainers. You must pull away from the vehicle (out to the side with a loud POP) and then towards the rear. There is a plastic support that holds the Fascia to the vehicle at the rear of the wheel wells - the bumper Fascia both clips in and has the screws attached that get removed -it is a tight fit and you cant be gentle. This is where a second pair of hands will help - the wiring harnesses (3 in total -rt side of vehicle) need to be disconnected while you hold the Fascia in the air - not quite long enough to set on ground without pulling things too tight. After the Bumper Fascia "Pops" off - everything is clear from then on.
I then trimmed the Access door/plate with a Dremel and Grinder to fill in all of the extra space (see Picture) - take your time with this = measure twice and cut once because you are on your own as there is no stencil provided.
Warning - The Curt Hitch Receiver does not replace the original/allow for the use of the original Audi Tow eye tool to be used. The tow eye access caps become useless - there are the 2 cap/flaps in the bumper.
Chris C.
4/20/2015
Hi Don,Great job on your Q7 and thanks for the details. It gave me the courage of going forward on this. I had put few hitches previously but this one didnt look that simple. Where did you get the wiring harness?I got mine2015 a few month ago and your experience and tips about this car will be very welcome too.ThanksChris
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Kevin J.
8/8/2021
This product is still the best purchase ever for my vehicle. People ask about it all the time and I tell them that I purchased it from etrailer and even installed it myself after watching the video on etrailers site. Even my auto dealer complimented my hitch even though I didnt purchase from them. Ive connected a simple bike rack to a more sturdier bike rack to haul 4 bikes. Love this hitch.