Replacing A 16.5 x 6.5 - 8 Wheel/Tire With A 18.5 x 8.5 - 8 Wheel/Tire
Updated 08/01/2017 | Published 07/29/2017
Products Featured in This Question
Question:
I have acquired a small jet ski trailer with 16.5x6.5-8 with 4 bolt pattern. The tires are dry rotted and need replacement. Is it possible to fit new 18.5x8.5-8 tire/wheel combo?
asked by: Joe
Expert Reply:
In order to account for the new tire and wheel size, you will want to take a few measurements. A 16.5 x 6.5 - 8 wheel is 5.3" wide with an overall height of 16.5". A 18.5 x 8.5 - 8 wheel is 7" wide with an overall height of 18.3". Therefore, the 18.5 x 8.5 - 8 setup will be 1.6" wider and 1.8" taller than the 16.5 x 6.5 - 8 setup. Please note that you will want to allow for 4.5" of clearance between the top of the tire and the bottom edge of the fender for proper suspension travel.
If the larger wheel is compatible with your trailer, I recommend using the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel part # AM3H290. If the larger wheel will not fit the trailer, I recommend using the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel part # AM3H200. Both tires are equipped with a 2 warranty and have a load range C rating.
I have attached a video review on each wheel and tire combo for you.
Product Page this Question was Asked From
Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 215/60-8
- 8 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 165 x 65 8 tires
- Search Results: 175 rim
- Search Results: 175
- Search Results: 175 x 675 rim
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Taskmaster Solid Center Wheel w/ -0.19 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver
- Shop: Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset - 5 on 4-1/2 - Load Range C
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Video: Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel Review
- Shop: Steel Trailer Wheel - 8" x 5-3/8" Rim - 5 on 4-1/2 - Galvanized Finish
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Video: The Low-Down on the Permanent Awning Saver Door Roller
- Q&A: Can I Upgrade to a Load Range D Tire Size 165/65-8
- Q&A: Is 165/65-8 Trailer Tire the Same Size as 16.5 x 6.5 - 8
- Search Results: trailer jack
- Search Results: akhd~865
- Search Results: 8~393
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Correct Replacement Size for 16.5 x 6.5-8 Tires
- Q&A: Is There a Larger Tire Size Than 5.70-8 For an 8 Inch Wheel
- Q&A: Can 18.5 x 8.5 - 8 Tires be Replaced with 215/60-8 Tires
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Determine Tire/Wheel Diameter
- Article: Best Boat Accessories for Fishing
- Article: How to Tell the Weight Rating of a Trailer Axle