Is 165/65-8 Trailer Tire the Same Size as 16.5 x 6.5 - 8  

The 16 x 6.5 x 8 tire size that you have on your Coleman Concord trailer is an older tire size. The current size that is closest is 165/65-8. We have the Kenda Loadstar K399 Bias Trailer Tire #AM1HP22 which is a size 165/65-8 Load Range C (800 lbs at…

The 165/65-8 tire will work just fine in place of a 215/60-8 tire so you should not have any issues so long as you mind the load range ratings. The Loadstar K399 Bias Trailer Tire part #AM1HP22 and Kenda 165/65-8 Bias Trailer Tire with 8" White…

I recommend using the same size tire the trailer already has. With such low weight pretty much any capacity will be sufficient. For your 165/65-8 sized tires we have #AM1HP22 which have a 65 mph speed rating and are 6 ply tires. The weight capacity…

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8, which is what I would recommend. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link below),…

The Loadstar K399 tire, part #AM1HP22 has a maximum speed of 65 mph. Running the tires at a faster speed would build up more heat in the tires, and would shorten their life. We recommend always keeping your tires inflated to the maximum pressure…

The tire size you have now of 4.80x8 is designed to fit a wheel width of 3-3/4 inches whereas the size of the #AM1HP22 is wider and needs a 5-3/8 inch wide wheel. You'd need to stick with your current tire size which we offer with the part…

The correct size that will replace your 16.5 x 6.5-8 tires is 165/65-8; we do carry these tires in stock, the Kenda Loadstar #AM1HP22. These tires fit 8" x 5-3/8" rims, have a load range of C, speed rating of 65 mph and maximum capacity of…

The 165/65-8 tire is the new metric size for the 16.5 X 6.5-8 tire. So you can use the 165/65-8 size tire in place of the 16.5 X 6.5-8 tire. I have the Loadstar K399 Bias Trailer Tire, #AM1HP22, in the 165/65-8 size and it is a load range C tire with…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…