What Are The Replacement Bearings For My 2,800 Lb. EZ Loader Trailer Axle
Updated 07/14/2017 | Published 07/13/2017
Products Featured in This Question
Question:
ez loader bearing for 1zeaaamc5ya008576 thanks
asked by: John
Expert Reply:
Thank you for the VIN. I called my contact at EZ Loaders Trailers and they informed me that this trailer uses the L44649 and L68149 bearings. Therefore, I recommend replace you existing bearing with our Bearing Kit for 84 Spindle part # BK2-100.
If you just want to replace just the bearings, you will want part # L44649 and part # L68149. When replacing your new bearing, I recommend using the LubriMatic LMX Industrial Strength Grease part # L11390. I have attached a video demonstration that will show you how to change and repack your new bearing for you.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Bleed an Actuator As Well As The Brake Lines On A Trailer
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Q&A: Replacement Part Availability And Options For Replacing An Atwood Brake Actuator
- Q&A: Recommended Brake Assembly Backing Plate Bolt Installation
- Q&A: Replacement Bearing Kit Needed for EZ Loader Trailer with 2,800 lb Axle
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Troubleshooting Surge Brakes Locking up When in Reverse
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized