Replacement Wheel Hoop Recommendation for Swagman XTC Bike Rack

Question

Question:

I need replacement trays for my Swagman 64670 XTC 2 bike rack 2inch by1 1/4 Receiver

asked by: June D

0

Expert Reply:

For replacement wheel cradles confirmed to fit your Swagman XTC part # S64670 you would want the part # S64674.

expert reply by: Jameson C

0

Answer 1

With your tires being slightly over the 2.5" tire width capacity of the Swagman XTC4 Bike Rack for 4 Bikes #S64665 you would need to swap out the wheel hoops with the Swagman Fat Bike Tire Wheel Adapter for XTC 2/XTC #S64674 in order to fit.

view full answer...

Answer 2

Thank you for all that information! While 46 lbs is actually pretty light for an E-Bike, the Swagman XC 2-Bike Rack #S64650 is only rated for up to 35 lb bikes. Since you like the design of the XC I recommend using the Swagman Current #S64678 which…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Yes, the correct nut insert for your Swagman XC part #S64650 that you referenced is the part #P313 that you referenced.

view full answer...

Answer 8

I reached out to the manufacturer, Swagman, concerning the fit of the Replacement Receiver Insert for Swagman Bike Racks - Hitch End #P313 on your Swagman Jackknife Bike Rack and was told it would work for your 1-1/4 inch hollow shank. Specifically,…

view full answer...

Answer 9

Yes, the Edge tuners are designed to work with the 6.7L I6 Turbocharged Diesel Engines that come on your 2020 Ram 3500. For your application I recommend the Edge Juice with Attitude CTS3 Performance Tuner #EP43DR because it comes with a 5"…

view full answer...

Answer 10

The Replacement T3 Cradle Body for Thule Bike Carriers #853-5829 and the Replacement Rubber Strap for Thule T3 Bike Carrier Cradles #753-3535 will most likely stretch to fit your 1-1/8 inch bars. However, I reached out to my contact at Thule and they…

view full answer...

Answer 11

Hey Mark, the best trailer hitch we offer for your 2025 Mazda CX-50 is the Curt hitch part #C33MJ. It is a 2 inch hitch with plenty of tongue weight capacity for your bike rack, is easy to install, and we have found that the Curt hitches have the…

view full answer...

Answer 12

While the Kuat NV 2.0 #NV22B can accommodate 4-1/2" wide tires, you need the phat tire adapter straps #APBK to do so.

view full answer...

Replacement Wheel Hoop Recommendation for Swagman XTC Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching