Replacement Lens Recommendation for Trailer Clearance Lens part # MC35AEB

Question

Question:

do you sell replacement lens for MC35AEB lights

asked by: Keith.roth

0

Expert Reply:

For a replacement lens that fits clearance light # MC35AEB I recommend # 114-15A. This lens is 2-3/4 inches by 2 inches and has the mounting holes (2) in a diagonal pattern.

expert reply by: Jameson C

0

Answer 1

There are running boards that fit your 2007 Dodge Ram 1500, but are not transferrable from a 2009 Ford F-150, no. The only fits for running boards for an '07 Ram 1500 are for a Quad Cab and will not work with Daytona, Rumble Bee and SRT-10…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 8

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 9

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Answer 10

Unfortunately Jensen keeps discontinuing their stereos so at this time I don't have a good replacement for the VM9726BT. The only stereos we currently have wouldn't be touchscreen or have the compatibility with a camera system if you have one…

view full answer...

Answer 11

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

view full answer...

Answer 12

Using a fifth wheel adapter like the Andersen Ultimate Connection, part #AM3200, will give you an additional 5 inches offset in the bed of your 2006 Dodge Ram 2500. Since there are no adapters that can be used with a Sidewinder pin box, I am afraid…

view full answer...

Replacement Lens Recommendation for Trailer Clearance Lens part # MC35AEB

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching