Availability of Idler Hub Assembly with Threaded Bolt Holes
Updated 04/03/2017 | Published 04/01/2017
Products Featured in This Question
Question:
I need 2 idler hubs for my boat trailer and I need them with female threaded holes for the wheel lug bolts. I dont see that type. Are the hub studs removable? Thanks
asked by: Steve P
Expert Reply:
We do have a few idler hub assemblies with threaded lug bolt holes currently available, such as the Redline Complete Agricultural Hub Assembly # AH30660FCOMP. This hub has a 6 on 6 bolt pattern and will fit Spindle # TRU34FR. It has an inner bearing # 29749 and outer bearing # LM67048.
The Dexter Trailer Hub Assembly # 42660UC1 also has a 6 on 6 bolt pattern but has an inner bearing # 25580 and outer bearing # LM67048
The CE Smith Trailer Hub Assembly # CE13100 is pre-greased and has a 4 on 4 bolt pattern. The # L44643 inner and outer bearings are included.
In order to determine the correct hub for your trailer, you will first need to find the wheel bolt pattern. I have attached a helpful article on how to measure this. Next you will want to make sure the bearing numbers match up to your existing unit to ensure it will fit onto the axle and spindle. The numbers should be stamped onto the bearings themselves.
I have attached a link that will take you to our available selection of idler hubs.
Product Page this Question was Asked From
Complete Agricultural Hub Assembly for Spindle # AS3000F
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM29749 / LM67048
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 6 Inch
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: gnrk1012
- Search Results: jack
- Search Results: sp~888175~105
- Search Results: #42 spindle
- Search Results: kr35
- Search Results: stemco
- Search Results: 7~292
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 12K
- Shop: G-Floor Small Coin Polyvinyl Flooring - Midnight Black - 65 Mil - 12' Long x 8'2" Wide
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - Preorder
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural
- Shop: Guardian Lock for Gen-Y Hitch Executive, Spartan, and Viking Gooseneck - Preorder
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
- Q&A: Fixed Side Vs. Float Side for Replacement Standard Dual Rack Repair Kit Wall Slide-Out
- Q&A: Trailer Hub w/6 Lug Pattern, Inner Bearing Inner Diameter 1.5, Outer Bearing Inner Diameter 1.25
- Q&A: Replacement Agricultural Hub Assembly for 6 on 6 Inch Bolt Pattern
- Q&A: Agricultural Spindle and Hub Combinations with 6 on 6 Inch and 8 on 8 Inch Bolt Patterns
- Q&A: Info Needed to Pick Out Replacement Hub for Older Trailer
- Q&A: Does the Agricultural Hub Assembly # AH30660FCOMP Have Threaded Bolt Holes Or Lug Studs?
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Video: Review of Marlboro Trailer Door Hinges - Butt Hinge - MA24MV
- Shop: Trailer Wiring
- Video: The Low-Down on the LED Light Strip Kit w/ Wireless RF Remote Control
- Video: Set up: Curt Front Mount Trailer Hitch Receiver on a 2017 Jeep Wrangler Unlimited
- Video: Set up: Draw-Tite Front Mount Trailer Hitch Receiver on a 2017 Jeep Wrangler Unlimited
- Video: Checking Out the Small Coin Pattern Vinyl Flooring
- Video: Large Coin Pattern Vinyl Flooring Spec Review
- Video: CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems Spec Review