Does the Agricultural Hub Assembly # AH30660FCOMP Have Threaded Bolt Holes Or Lug Studs?
Updated 04/27/2017 | Published 04/26/2017
Products Featured in This Question
Question:
Have a hub that matches this exactly accept mine has lug studs and not bolts as is illustrated with this one. Holes in hub in picture dont appear to be threaded. Can you verify if it used studs or bolts for me? Bearing #s etc. are a match for mine.
asked by: Larry B
Expert Reply:
The Complete Agricultural Hub Assembly for Spindle AS3000F # AH30660FCOMP has threaded bolt holes for the 1/2 inch Lug bolts that come with the hub. We don't have any that are the same 6 on 6 inch bolt pattern with lug studs, but the lug bolts will center the wheel just as well as a lug nut with their 90 degree coned bolt head.
I've attached the replacement Wheel Bolts, 1/2" x 7/8", 90 Degree (Qty 4) # RG02-040 for further help.
Product Page this Question was Asked From
Complete Agricultural Hub Assembly for Spindle # AS3000F
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM29749 / LM67048
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 6 Inch
- Redline
more information >
Continue Researching
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Replacement Shelves for Everchill RV Refrigerator SRD-360WTG-ED
- Q&A: Recommended Hub for a Inner Bearing JL69349 and Outer Bearing LM67048
- Q&A: How to Find Replacement for Hadco 322 Hubs
- Q&A: Trailer Hub w/6 Lug Pattern, Inner Bearing Inner Diameter 1.5, Outer Bearing Inner Diameter 1.25
- Article: Most Popular Wheel Bearings
- Article: Dealer Spotlight - Hamilton Trailer Repair
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups