Info Needed to Pick Out Replacement Hub for Older Trailer

Updated 04/06/2020 | Published 04/04/2020

Question:

Hello Would this be the correct hub and the correct wheel bearings for an Oliver 1800-C 1964. I’m tearing my hair out trying to reference the manual and find the proper conversions, etc etc All I know for sure is that the current hub on the tractor is a 6 bolt, with a 4 5/8” pilot for the wheel, and used the wheel bolts rather than lugs. Thank you

asked by: Eric Y

Expert Reply:

You'll have to pull the hub off and either get me the dimensions of the spindle where the bearings ride or the bearing numbers out of the hub to determine if we have something that will fit. You'll need a caliper to do this.

If you get back to me with that information, I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C